1、REAFFIRMED 2017Intentionally left blank The American Society ol Mechanical Engineers A NA MERIC A NN ATION AL STA ND A R D ASME B29.15M-1997(Revision of ASME B29.15M-1995)Date of Issuance:October 31,1997 This Standard will be revised when the Society approves the issuance of a new edition.There will
2、 be no addenda or written interpretations of the requirements of this Standard issued to this edition.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed under procedures accredited as meeting the criteria for American National Standar
3、ds.The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate.The proposed code or standard was made available for public review and comment which provides an opportunity for additio
4、nal public input from industry,academia,regulatory agencies,and the public-at-large.ASME does not approve,rate,or endorse any item,construction,proprietary device,or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items menti
5、oned in this document,and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable Letters Patent,nor assume any such liability.Users of a code or standard are expressly advised that determination of the validity of any such patent rights,and the
6、risk of infringement of such rights,is entirely their own responsibility.Participation by federal agency representatives)or person(s)affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretat
7、ions issued in accordance with governing ASME procedures and policies which preclude the issuance of interpretations by individual volunteers.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.Th
8、e American Society of Mechanical Engineers 345 East 47th Street,New York,NY 10017 Copyright 1997 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Printed in U.S.A.FOREWORD(This Foreword is not part of ASME B29.15M-1997.)Chains of the type covered by this Standard were introduced l
9、ate in the nineteenth century.These chains met with considerable success on material conveyors and elevators.Manufacturers developed and marketed many sizes and types in the following years.In the 1920s,a working group from the producers of these chains was formed to standardize them.In 1972,a subco
10、mmittee of American National Standards Committee B29 was appointed with American Chain Association members from the engineering steel chain industry to expand and update the existing standards.The 1997 revision of this Standard incorporates the new definition of Minimum Ultimate Tensile Strength(M.U
11、.T.S.),as well as updated sprocket symbols.This revision was approved by the American National Standards Institute on April 17,1997.Ill Intentionally left blankASME STANDARDS COMMITTEE B29 Chains,Attachments,and Sprockets for Power Transmission and Conveying(The following is the roster of the Commit
12、tee at the time of approval of this Standard.)OFFICERS C.B.Norberg,Chair R.H.Uttke,Vice ChairJ.L.Wright,Vice ChairK.M.Padilla,SecretaryCOMMITTEE PERSONNEL E.B.Beardslee,Beardslee Transmission Equipment Co.,long Island City,New York L.E.Hampel,Allied-Locke Industries,Inc.,Dixon,Illinois J.Kane,U.S.Ts
13、ubaki Inc.,Holyoke,Massachusetts C.McDonald,Jervis B.Webb Co.,New Hudson,Michigan D.Moore,Jeffrey Chain Co.,Morristown,Tennessee C.B.Norberg,Consultant,Ithaca,New York V.D.Petershack,Hitachi Maxco Ltd.,Oconomowoc,Wisconsin R.A.Reinfried,Conveyor Equipment Manufacturers Association,Manassas,VirginiaS
14、.Rhoad,Webster Industries,Inc.,Tiffin,OhioK.J.Smith,Drives,Inc.,Fulton,IllinoisR.H.Uttke,Rexnord Corp.,Milwaukee,WisconsinJ.L.Wright,Consultant,Indianapolis,IndianaD.N.Zwiep,Worcester Polytechnic Institute,Worcester,MassachusettsV Intentionally left blank CONTENTS Foreword.iii Standards Committee Ro
15、ster.v 1 Definitions.2 General Chain Proportions and Designations.3 Dimensions of Chain Links.4 Attachment Dimensions.5 Sprocket Tooth Form.Figures I Steel Roller Type Conveyor Chains.2 2 Dimensions of Chain Links.4 3 Sprocket Tooth Form.5 Tables I General Chain Dimensions,M.U.T.S.,Strand Length,and
16、 Measuring Load.3 2 Maximum and Minimum Controlling Dimensions for Interchangeable Chain Links.5 3 Chain Clearance Dimensions.6 4 A-I Attachments.7 5 A-2 Attachments.8 6 A-42 Attachments.9 7 K-1 Attachments.10 8 K-2 Attachments.11 9 Sprockets-Maximum Eccentricity and Face Runout Tolerances.12 I O Sprocket Factors.12 vii Intentionally left blank ASME 829.15M-1997 STEEL ROLLER TYPE CONVEYOR CHAINS,ATTACHMENTS,1 DEFINITIONS M.U.T.S.:Minimum Ultimate Tensile Strength,the minimum force at which an un