1、Designation:E134616Standard Practice forBulk Sampling,Handling,and Preparing Edible VegetableOils for Sensory Evaluation1This standard is issued under the fixed designation E1346;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the ye
2、ar of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This practice covers the recommended procedures forbulk sampling,handling,and preparing edible vegetable oil(liquid a
3、t room temperature)prior to sensory evaluation.1.2 This practice is consistent with the background infor-mation presented in ASTM STP 433,ASTM Manual 26,andASTM STP 758.These should be consulted for supplementalguidance.1.3 The values stated in SI units are to be regarded asstandard.The values given
4、 in parentheses are for informationonly.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory lim
5、itations prior to use.2.Referenced Documents2.1 ASTM Publications:2ASTM STP 433 Basic Principles of Sensory EvaluationASTM Manual 26 Manual on Sensory Testing Methods,2ndEd.ASTM STP 758 Guidelines for the Selection and Training ofSensory Panel Members2.2 AOCS Standard:3Method C1-47 Sampling3.Summary
6、 of Practice3.1 This practice consists of the following basic steps:removing oil from bulk source,transporting and storing oilprior to evaluation,preparing oils for evaluation,presentingsamples to panel,and cleaning glassware.4.Significance and Use4.1 This practice is designed for use by the oil pro
7、cessor orresearch laboratory for evaluation by a trained sensory panel,or for use by quality control(QC)and quality assurance(QA)personnel for sampling from a tank truck,car,or any other bulktransportation container,or by both.4.2 The consistent use of this practice will provide repre-sentative samp
8、les for all sensory,chemical and physicalanalyses and will protect the oil from oxidation.4.3 The objective of this practice is to ensure that the sampleis representative of the sample source from the time ofsampling until the time of evaluation and to protect oil qualityduring that time.4.4 This pr
9、actice addresses neither evaluation and scalingtechniques,nor the sampling,handling,and preparing of solidfats.5.Apparatus5.1 Liquid Zone Sampler,or core sampler,or trier.45.2 Wide-Mouth Jars made of polyethylene terephthalate,0.5 to 1.0 L.5.3 Amber Glass Bottles,250 mLto 1 L,with narrow-mouthtops t
10、hat will withstand freezer temperatures.5.4 Plastic Caps with polytetrafluoroethylene(PTFE)Liners,or tape(PTFE pipe thread tape),to cover top of bottleopening before capping with new non-metallic screw typecaps.Tape should be 2.5 cm in width or wider to completelycover bottle openings.5.5 Glass Funn
11、els.5.6 Glove Box with inert gas(for example,nitrogen)atmosphere,including an oxygen scavenging device.5.7 Glass Vial,50 mL.Use amber glass for odor and flavorevaluation;and clear glass for visual examination of oil.5.8 Standard Disposable Glass Pipets,10 mL,one per eachsample.1This practice is unde
12、r the jurisdiction of ASTM Committee E18 on SensoryEvaluationand is the direct responsibility of Subcommittee E18.06 on Food andBeverage Evaluation.Current edition approved Aug.1,2016.Published August 2016.Originallyapproved in 1990.Last previous edition approved in 2010 as E1346 90(2010).DOI:10.152
13、0/E1346-16.2Available from ASTM International Headquarters,100 Barr Harbor Drive,POBox C700,West Conshohocken,PA 19428-2959.3Available from American Oil Chemists Society,P.O.Box 3989,Champaign,IL 61826.4Available from Refinery Supply Co.,Tulsa,OK.Copyright ASTM International,100 Barr Harbor Drive,PO
14、 Box C700,West Conshohocken,PA 19428-2959.United States1 5.9 Circulating Water bath,with automatic timer,thermo-stat and rack.5.10 Water bath Thermometer,with range from 20 to 100Cin 1C divisions,calibrated for 76 mm immersion,305 mmlong.6.Precautions6.1 Oil submitted for chemical and physical testi
15、ng and forsensory evaluation should be from the same bulk sampling.Tank trucks,cars,or any other bulk transportation containersmay be filled with as many as seven layers and each level of oilmay be slightly different in quality.Oil samples should behandled in the same manner and time frame to ensure
16、 high datacorrelation.6.2 Obtain a representative oil sample for all evaluations(sensory,chemical,instrumental);unblended multiple samplesmay produce different results.6.3 Do not allow glass containers in processing or produc-tion areas where oil sampling is done.6.4 Use only new,clean,dry,and odor-free polyethyleneterephthalate(PET)wide-mouth jars to collect oil samples;dispose of jars rather than cleaning them.6.5 Store oil in amber glass bottles to protect the oil fromlight oxidation.6.6 Choo