1、Designation:D771318Standard Specification forAqueous Engine Coolant Grade Glycol(53%by VolumeNominal)1This standard is issued under the fixed designation D7713;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision
2、.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers both commercial products,engine coolant grade ethylene glycol and propylene glycol,including virgin glycols an
3、d those derived from the recyclingof vehicle engine coolants and industrial source glycols.1.2 Types EG-1 and PG-1 cover glycols with sufficientlylow limits on components to allow a blended coolant to meetmost OEM(Original Equipment Manufacturer)specifications.These types will probably be virgin mat
4、erials,although redis-tillation could produce a sufficiently pure product.Types EG-2and PG-2 cover glycol that will be suitable for many coolants.These types can be either redistilled or virgin.1.3 The values stated in SI units are to be regarded asstandard.No other units of measurement are included
5、 in thisstandard.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations
6、prior to use.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization Technica
7、lBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D1122 Test Method for Density or Relative Density ofEngine Coolant Concentrates and Engine Coolants By TheHydrometerD1123 Test Methods for Water in Engine Coolant Concen-trate by the Karl Fischer Reagent MethodD1177 Test Meth
8、od for Freezing Point of Aqueous EngineCoolantsD1209 Test Method for Color of Clear Liquids(Platinum-Cobalt Scale)D1287 Test Method for pH of Engine Coolants andAntirustsD1613 Test Method for Acidity in Volatile Solvents andChemical Intermediates Used in Paint,Varnish,Lacquer,and Related ProductsD36
9、34 Test Method for Trace Chloride Ion in Engine Cool-antsD4052 Test Method for Density,Relative Density,and APIGravity of Liquids by Digital Density MeterD4725 Terminology for Engine Coolants and Related FluidsD5827 Test Method for Analysis of Engine Coolant forChloride and Other Anions by Ion Chrom
10、atographyD5931 Test Method for Density and Relative Density ofEngine Coolant Concentrates and Aqueous Engine Cool-ants by Digital Density MeterD6130 Test Method for Determination of Silicon and OtherElements in Engine Coolant by Inductively CoupledPlasma-Atomic Emission SpectroscopyD6660 Test Method
11、 for Freezing Point of Aqueous EthyleneGlycol Base Engine Coolants by Automatic Phase Tran-sition MethodD7736 Test Method for Determination of Acids and GlycolEsters in Ethylene GlycolE202 Test Methods for Analysis of Ethylene Glycols andPropylene GlycolsE300 Practice for Sampling Industrial Chemica
12、lsE394 Test Method for Iron in Trace Quantities Using the1,10-Phenanthroline MethodE1177 Specification for Engine Coolant Grade Glycol3.Requirements3.1 Engine coolant grade 53%(vv)(nominal)ethyleneglycol or propylene glycol shall conform to the chemical andphysical property requirements in Table 1.4
13、.Sampling4.1 Sample ethylene or propylene glycol in accordance withthe appropriate sections of Practice E300 for liquid samples.1This specification is under the jurisdiction ofASTM Committee D15 on EngineCoolants and Related Fluids and is the direct responsibility of SubcommitteeD15.07 on Specificat
14、ions.Current edition approved Nov.1,2018.Published November 2018.Originallyapproved in 2011.Last previous edition approved in 2012 as D771312.DOI:10.1520/D771318.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of A
15、STMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principl
16、es on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 5.Packaging,Package Markings,and Transportation5.1 The packaging,labeling,and transportation of commer-cial quantities shall conform to applicable federal,state,andlocal regulations.Conformance is the responsibility of themanufacturer and the shipper.6.Keywords6.1 engine coolant;