1、Designation:D698603(Reapproved 2020)An American National StandardStandard Test Method forFree Water,Particulate and Other Contamination in AviationFuels(Visual Inspection Procedures)1This standard is issued under the fixed designation D6986;the number immediately following the designation indicates
2、the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONFuel quality is paramount in aviation fuels because of
3、 their critical application.Many successivetypes of inspections are conducted to ensure quality protection.Rapid,visual inspections carried outat various locations in the fuel supply system are a critical part of the inspection program.Experiencehas shown that subjective evaluations such as describe
4、d by this test method form an effective field alertsystem that is backed by other,more quantitative tests.The present test method duplicates much of Test Method D4176,a test method applicable to alldistillate fuels.However,the present test method also includes field methods applicable especially toa
5、viation fuels,and is therefore published as a separate test method.1.Scope1.1 This test method covers two procedures for establishingthe presence of suspended free water,solid particulate,andother contaminants in aviation gasoline and aviation turbinefuels.1.1.1 Both procedures are intended primaril
6、y for use as fieldtests with the fuel at handling temperature.1.1.2 Procedure A uses transparent sample containers;Pro-cedure B uses opaque containers.1.2 Both procedures are rapid methods for contaminationdetection and include ratings of haze appearance and particu-late presence.1.3 The values stat
7、ed in SI units are to be regarded as thestandard.The values given in parentheses are for informationonly.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of Interna
8、tional Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D2276 Test Method for Particulate Contaminant in AviationFuel by Line SamplingD3240 Test Method for Undissolved Water In AviationTurb
9、ine FuelsD4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4176 Test Method for Free Water and Particulate Contami-nation in Distillate Fuels(Visual Inspection Procedures)D5452 Test Method for Particulate Contamination in Avia-tion Fuels by Laboratory Filtration2.2 ASTM Adjuncts:
10、ADJD417601 Distillate Fuel Bar Chart3ADJD417602 Distillate Fuel Haze Rating Standard43.Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 aviation fuels,nas used in this standard,the termincludes both aviation gasoline and aviation turbine fuels.1This test method is under the jurisd
11、iction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct responsibility ofSubcommittee D02.J0 on Aviation Fuels.Current edition approved May 1,2020.Published June 2020.Originallypublished in 2003.Last previous edition approved in 2016 as D6986 03(2016).DOI:10.1
12、520/D6986-03R20.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Available from ASTM International Headquarters.Or
13、der Adjunct No.ADJD417601.4Available from ASTM International Headquarters.Order Adjunct No.ADJD417602.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized pr
14、inciples on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.3.1.2 clear and bright,adja condition in which the fuelcontains no visible w
15、ater drops or particulates and is free ofhaze or cloudiness.3.1.3 free water,nwater in excess to that soluble in thefuel at the temperature of the test and may appear in the fuel asa haze,cloudiness,droplets,or water layer.3.1.4 solid particulates,nsmall solid or semi-solidparticles,sometimes referr
16、ed to as silt or sediment,present ina fuel as the result of contamination by airborne dusts,corrosion by-products,or wear products.4.Summary of Test Method4.1 The test method describes two types of sampling con-tainers for evaluating the appearance of aviation fuel samples.Procedure A covers transparent sample containers,includingthe open jar and the closed circuit sampler,while Procedure Buses opaque containers such as the white bucket.4.2 In the open jar procedure,a minimum of 750 mL(24 oz)of