1、Designation:D6727/D6727M16Standard Guide forConducting Borehole Geophysical LoggingNeutron1This standard is issued under the fixed designation D6727/D6727M;the number immediately following the designation indicates theyear of original adoption or,in the case of revision,the year of last revision.A n
2、umber in parentheses indicates the year of lastreapproval.A superscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This guide is focused on the general procedures neces-sary to conduct neutron or neutron porosity(hereafter referredto as neutron)logging o
3、f boreholes,wells,access tubes,caissons,or shafts(hereafter referred to as boreholes)ascommonly applied to geologic,engineering,groundwater andenvironmental(hereafter referred to as geotechnical)explora-tions.Neutron soil moisture measurements made using neutronmoisture gauges,are excluded.Neutron l
4、ogging for minerals orpetroleum applications is excluded,along with neutron activa-tion logs where gamma spectral detectors are used to charac-terize the induced gamma activity of minerals exposed toneutron radiation.1.2 This guide defines a neutron log as a record of the rateat which thermal and ep
5、ithermal neutrons are scattered back toone or more detectors located on a probe adjacent to a neutronsource.1.2.1 Induction logs are treated quantitatively and should beinterpreted with other logs and data whenever possible.1.2.2 Neutron logs are commonly used to:(1)delineatelithology,and(2)indicate
6、 the water-filled porosity of forma-tions(see Fig.1).1.3 This guide is restricted to neutron logging with nuclearcounters consisting of scintillation detectors(crystals coupledwith photomultiplier tubes),or to He3-tube detectors with orwithout Cd foil covers or coatings to exclude thermalizedneutron
7、s.1.4 This guide provides an overview of neutron loggingincluding:(1)general procedures;(2)specific documentation;(3)calibration and standardization,and(4)log quality andinterpretation.1.5 To obtain additional information on neutron logs seeReferences section in this guide.1.6 This guide offers an o
8、rganized collection of informationor a series of options and does not recommend a specific courseof action.This guide should not be used as a sole criterion forneutron logging and does not replace education,experience,and professional judgment.Neutron logging procedures shouldbe adapted to meet the
9、needs of a range of applications andstated in general terms so that flexibility or innovation are notsuppressed.Not all aspects of this guide may be applicable inall circumstances.This ASTM standard is not intended torepresent or replace the standard of care by which the adequacyof a given professio
10、nal service must be judged withoutconsideration of a projects many unique aspects.The wordstandard in the title of this document means that the documenthas been approved through the ASTM consensus process.1.7 UnitsThe values stated in either inch-pound units orSI units given in brackets are to be re
11、garded separately asstandard.The values stated in each system may not be exactequivalents;therefore,each system shall be use independentlyof the other.Combining values from the two systems mayresult in non-conformance with the standard.Add if appropri-ate:“Reporting of test results in units other th
12、an SI shall not beregarded as nonconformance with this standard.”1.8 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica
13、-bility of regulatory requirements prior to use.The use ofradioactive sources in neutron logging introduces significantsafety issues related to the transportation and handling ofneutron sources,and in procedures to ensure that sources arenot lost or damaged during logging.There are differentrestrict
14、ions on the use of radioactive sources in logging indifferent states,and the Nuclear Regulatory Agency(NRC)maintains strict rules and regulations for the licensing ofpersonnel authorized to conduct nuclear source logging.2.Referenced Documents2.1 ASTM Standards:2D653 Terminology Relating to Soil,Roc
15、k,and ContainedFluids1This guide is under the jurisdiction ofASTM Committee D18 on Soil and Rockand is the direct responsibility of Subcommittee D18.01 on Surface and SubsurfaceCharacterization.Current edition approved Jan.1,2016.Published January 2016.Originallyapproved in 2001.Last previous editio
16、n approved in 2007 as D6727 01(2007).DOI:10.1520/D6727_D6727M-16.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 D5088 Practice for Deconta