1、Designation:D586612(Reapproved 2020)Standard Test Method forNeps in Cotton Fibers1This standard is issued under the fixed designation D5866;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parenth
2、eses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers the measurement of the quantityand size of neps in cotton using various instruments.1.2 This test method is intended for testing gin
3、ned cottonand cotton taken from various fiber processing stages.1.3 The values stated in SI units are to be regarded asstandard.No other units of measurement are included in thisstandard.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is ther
4、esponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-i
5、zation established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D123 Terminology Relating to TextilesD1441 Practice for
6、 Sampling Cotton Fibers for TestingE691 Practice for Conducting an Interlaboratory Study toDetermine the Precision of a Test MethodD7139 Terminology for Cotton Fibers3.Terminology3.1 For all terminology related to D13.11,refer to Termi-nology D7139.3.1.1 The following terms are relevant to this stan
7、dard:ginned lint,nep,sliver.3.2 For all other terminology related to textiles,refer toTerminology D123.4.Summary of Test Method4.1 A pre-weighed mass of cotton fibers is prepared perinstrument manufacturer specifications.The instrument thenquantifies the neps and measures the size(diameter)of eachne
8、p.4.2 Test data shows the mean or average nep size and thetotal number of neps per unit mass.5.Significance and Use5.1 Entangled cotton fibers that form neps have two sources:those that occur naturally as the cotton fiber develops on theplant into lint that is ready to be harvested and those that oc
9、curfrom mechanical action in harvesting,ginning,cleaning,card-ing or from a combination of mechanical action.5.2 This test method does not identify whether the nepscounted and measured are a result of seed variety,environmen-tal influences,type of harvesting,or a result of mechanicalprocessing.Howev
10、er,this information can be obtained fromstudies where samples are taken from plants in the field beforeharvesting and ginning,before and after cleaning,and cardingbefore spinning.5.3 The measurement of nep size and quantity going into,and coming out of,a fiber processing stage are commonly usedto ma
11、ke adjustments in the processing machinery to reduce oreliminate the generation of mechanical neps.Neps that remainin spun yarns have a direct influence on neps in fabrics.Foralmost all types of yarn or fabric,neps are considered defects.5.4 This test method provides a consistent and repeatablemeasu
12、rement of fiber nep count and size.Check cotton samplessupplied by the manufacturer are used to verify consistentmeasurement levels and laboratory-to-laboratory precision.5.5 This test method is considered satisfactory for accep-tance testing when the levels of the laboratories are controlledby the
13、use of the same reference standard cotton samplesbecause the current estimates of between-laboratory precisionare acceptable under these conditions.If there are differencesof practical significance between reported test results for twolaboratories or more,comparative tests should be performed todete
14、rmine if there is a statistical bias between them using1This test method is under the jurisdiction ofASTM Committee D13 on Textilesand is the direct responsibility of Subcommittee D13.11 on Cotton Fibers.Current edition approved July 1,2020.Published July 2020.Originally approvedin 1995.Last previou
15、s edition approved in 2012 as D5866 12.DOI:10.1520/D5866-12R20.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Cop
16、yright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Cpetent statistical assistance.At a minimum,ensure the testsamples to be used are as homoge