1、Designation:D559603(Reapproved 2021)Standard Test Method forMicroscopic Evaluation of the Dispersion of Carbon Blackin Polyolefin Geosynthetics1This standard is issued under the fixed designation D5596;the number immediately following the designation indicates the year oforiginal adoption or,in the
2、case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers equipment,specimen prepara-tion techniques,and procedures for evaluati
3、ng the dispersion ofcarbon black in polyolefin geosynthetics containing less than5%carbon black by weight.1.2 This test method allows for a qualitative evaluation ofcarbon black agglomerates and other inclusions in polyolefingeosynthetics.This evaluation is based on carbon black dis-persion size cal
4、culated area within microscopic fields of view.1.3 The values stated in SI units are to be regarded as thestandard.The values given in parentheses are for informationonly.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of
5、 the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.NOTE1This test method is for the evaluation of carbon blackdispersion.This test method does not support or evaluate the distributiono
6、f carbon black.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization Techni
7、calBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D883 Terminology Relating to PlasticsD3053 Terminology Relating to Carbon BlackD4439 Terminology for GeosyntheticsE7 Terminology Relating to Metallography3.Terminology3.1 Definitions:3.1.1 carbon black,na material consistin
8、g essentially ofelemental carbon black in the form of near spherical colloidalparticles and coalesced particle aggregates of colloidal size,obtained by partial combustion or thermal decomposition ofhydrocarbons.(D3053)3.1.2 carbon black agglomerate,na cluster of physicallybound and entangled aggrega
9、tes.(D3053)3.1.3 geosynthetic,na planar product manufactured frompolymeric material used with soil,rock,earth,or other geo-technical engineering-related material as an integral part of aman-made project,structure,or system.(D4439)3.1.4 micrograph,na graphic reproduction of an object asseen through t
10、he microscope or equivalent optical instrument,at magnifications greater than ten diameters(micrograph).(E7)3.1.5 microtome,n(that is,sliding microtome)an appara-tus capable of cutting thin slices(less than 20 m in thickness)of various geosynthetic samples.3.1.6 polyolefin,na polymer prepared by the
11、 polymeriza-tion of an olefin(s)as the sole monomer(s).(D883)3.1.7 dispersion,na polyolefin product formulated withcarbon black.3.1.8 distribution,na property of a carbon black formu-lated polyolefin product that refers to the existence of streaks,light or dark,within a microsectioned sample.4.Summa
12、ry of Test Method4.1 This test method consists of two parts:(1)microtomespecimen preparation,and(2)microscopic evaluation.4.1.1 Microtome Specimen PreparationA sample isclamped in the sample holder,which can be raised or loweredprecisely in increments of approximately 1 m.A rigid knife isslid manual
13、ly across the sample so that the specimens range inthickness from 8 to 20 m.4.1.2 Microtome Specimen ExaminationThese thin sec-tions are evaluated microscopically calculating the largestagglomerate or inclusion in each random field of view(Rf).1This test method is under the jurisdiction of ASTM Comm
14、ittee D35 onGeosynthetics and is the direct responsibility of Subcommittee D35.02 on Endur-ance Properties.Current edition approved May 1,2021.Published May 2021.Originallyapproved in 1994.Last previous edition approved in 2016 as D5596 03(2016).DOI:10.1520/D5596-03R21.2For referenced ASTM standards
15、,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.U
16、nited StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1The associated carbon dispersion chart can be used to assist todetermining shape and area5.Significance and Use5.1 Carbon black is added to many polymers to providelong-term