1、Designation:D5031/D5031M13Standard Practice forEnclosed Carbon-Arc Exposure Tests of Paint and RelatedCoatings1This standard is issued under the fixed designation D5031/D5031M;the number immediately following the designation indicates theyear of original adoption or,in the case of revision,the year
2、of last revision.A number in parentheses indicates the year of lastreapproval.A superscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This practice covers the selection of test conditions foraccelerated exposure testing of coatings and related products
3、inenclosed carbon arc devices operated according to PracticesG151 and G153.This practice also covers the preparation oftest specimens,the test conditions suited for coatings,and theevaluation of test results.Table 1 describes commonly used testconditions.1.2 This practice does not cover filtered ope
4、n-flame carbon-arc exposures of paints and related coatings,which is describedin Practice D822/D822M.Another procedure for exposingthese products is covered by Practice D3361/D3361M,inwhich the specimens are subjected to radiation from anunfiltered open-flame carbon arc that produces shorter wave-le
5、ngths and higher levels of short wavelength radiation thanfiltered open flame or enclosed carbon arcs.NOTE1Practice D3361/D3361M requires use of open-flame carbon-arc apparatus with automatic humidity control.1.3 The values stated in either SI units or inch-pound unitsare to be regarded separately a
6、s standard.The values stated ineach system may not be exact equivalents;therefore,eachsystem shall be used independently of the other.Combiningvalues from the two systems may result in non-conformancewith the standard.1.4 This standard does not purport to address all of thesafety concerns,if any,ass
7、ociated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D358 Specification for Wood to Be Used as Panels inWeather
8、ing Tests of Coatings(Withdrawn 2014)3D523 Test Method for Specular GlossD609 Practice for Preparation of Cold-Rolled Steel Panelsfor Testing Paint,Varnish,Conversion Coatings,andRelated Coating ProductsD610 Practice for Evaluating Degree of Rusting on PaintedSteel SurfacesD659 Method for Evaluating
9、 Degree of Chalking of ExteriorPaints(Withdrawn 1990)3D660 Test Method for Evaluating Degree of Checking ofExterior PaintsD662 Test Method for Evaluating Degree of Erosion ofExterior PaintsD714 Test Method for Evaluating Degree of Blistering ofPaintsD772 Test Method for Evaluating Degree of Flaking(
10、Scal-ing)of Exterior PaintsD822/D822M Practice for Filtered Open-Flame Carbon-ArcExposures of Paint and Related CoatingsD823 Practices for Producing Films of Uniform Thicknessof Paint,Varnish,and Related Products on Test PanelsD1005 Test Method for Measurement of Dry-Film Thick-ness of Organic Coati
11、ngs Using MicrometersD1186 Test Methods for Nondestructive Measurement ofDry Film Thickness of Nonmagnetic Coatings Applied toa Ferrous Base(Withdrawn 2006)3D1400 Test Method for Nondestructive Measurement of DryFilm Thickness of Nonconductive Coatings Applied to aNonferrous Metal Base(Withdrawn 200
12、6)3D1729 Practice for Visual Appraisal of Colors and ColorDifferences of Diffusely-Illuminated Opaque MaterialsD1730 PracticesforPreparationof AluminumandAluminum-Alloy Surfaces for PaintingD2244 Practice for Calculation of Color Tolerances andColor Differences from Instrumentally Measured ColorCoor
13、dinatesD2616 Test Method for Evaluation of Visual Color Differ-ence With a Gray Scale1This practice is under the jurisdiction of ASTM Committee D01 on Paint andRelated Coatings,Materials,and Applications and is the direct responsibility ofSubcommittee D01.27 on Accelerated Testing.Current edition ap
14、proved Oct.1,2013.Published October 2013.Originallyapproved in 1989.Last previous edition approved in 2006 as D5031 01(2006).DOI:10.1520/D5031_D5031M-13.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStanda
15、rds volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,W
16、est Conshohocken,PA 19428-2959.United States1 D3361/D3361M PracticeforUnfilteredOpen-FlameCarbon-Arc Exposures of Paint and Related CoatingsD4214 Test Methods for Evaluating the Degree of Chalkingof Exterior Paint FilmsD5870 Practice for Calculating Property Retention Index ofPlasticsE691 Practice for Conducting an Interlaboratory Study toDetermine the Precision of a Test MethodE1347 Test Method for Color and Color-Difference Mea-surement by Tristimulus ColorimetryG113 Terminology Relating to Na