1、Designation:D472817(Reapproved 2022)Standard Test Method forRandom Vibration Testing of Shipping Containers1This standard is issued under the fixed designation D4728;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last re
2、vision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers the random vibration testing offilled shipping units.Such tests may be used to assess theperformance of a
3、container with its interior packing and meansof closure in terms of its ruggedness and the protection that itprovides the contents when subjected to random vibrationinputs.1.2 This test method provides guidance in the developmentand use of vibration data in the testing of shipping containers.NOTE1So
4、urces of supplementary information are listed in theReference section(1-11).21.3 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices
5、 and deter-mine the applicability of regulatory limitations prior to use.Specific safety hazard statements are given in Section 6.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for
6、theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:3D996 Terminology of Packaging and Distribution Environ-mentsD4169 Practice for Performance Testing of Shippi
7、ng Con-tainers and SystemsD4332 Practice for Conditioning Containers,Packages,orPackaging Components for TestingD7386 Practice for Performance Testing of Packages forSingle Parcel Delivery Systems2.2 ISO Standards:ISO 13355 PackagingComplete,filled transport packagesand unit loadsVertical random vib
8、ration test42.3 ISTA Standards:5ISTA Procedure 1G Packaged-Products 150 lb(68 kg)orLess(Random Vibration)ISTA Procedure 3A Packaged-Products for Parcel DeliverySystem Shipment 70 kg(150 lb)or LessISTA Procedure 3H Products or Packaged-Products in Me-chanically Handled Bulk Transport Containers3.Term
9、inology3.1 Definitions:3.1.1 GeneralDefinitions for the packaging and distribu-tion environments are found in Terminology D996.3.2 Definitions of Terms Specific to This Standard:3.2.1 bandwidththe difference,in Hz,between the upperand lower limits of a frequency band.For the purposes of thistest met
10、hod,the bandwidth may be considered equivalent tothe frequency resolution of a spectrum analysis.3.2.2 closed-loopa condition of control where the inputmay be modified over time by the effect of the output orresponse of the system.3.2.3 decibel(dB)ten times the base 10 logarithm of aratio of two pow
11、er like quantities that is,a PSD.Two PSDlevels that have a ratio of 2.0 differ by 3 dB.Two PSD levelsthat have a ratio of 0.5 differ by 3 dB.3.2.4 equalizationadjustment or correction of the ampli-tude characteristics of an electronic control signal throughout adesired frequency range to maintain a
12、desired vibration outputspectrum and level.3.2.5 equalizerinstrumentation used to conduct equaliza-tion.3.2.6 mean-squarethe time average of the square of afunction.1This test method is under the jurisdiction of ASTM Committee D10 onPackaging and is the direct responsibility of Subcommittee D10.21 o
13、n ShippingContainers and Systems-Application of Performance Test Methods.Current edition approved May 1,2022.Published May 2022.Originallypublished as D-10 Proposal P 186.Last previous edition approved in 2017 asD4728 17.DOI:10.1520/D4728-17R22.2The boldface numbers in parentheses refer to the list
14、of references at the end ofthis test method.3For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.4Available from Intern
15、ational Organization for Standardization(ISO),1,ch.dela Voie-Creuse,CP 56,CH-1211 Geneva 20,Switzerland,http:/www.iso.org.5Available from International Safe Transit Association(ISTA),1400 AbbotRoad,Suite 160,East Lansing,MI 48823-1900,http:/www.ista.org.Copyright ASTM International,100 Barr Harbor D
16、rive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.13.2.7 overall g rmsthe square root of the integral of powerspectral density over the total frequency range.3.2.8 periodic v