1、Designation:D318115(Reapproved 2019)Standard Guide forConducting Wear Tests on Textiles1This standard is issued under the fixed designation D3181;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in p
2、arentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide is intended to provide guidance for thedesign of an experiment for the purpose of developing aprediction of expected wear performance of ap
3、parel and textileproducts when exposed to actual use conditions.1.2 This guide recommends the use of a product for whicha history of its performance is known from laboratory testingand consumer use as the basis for statistical significance of newproducts performance,however,other design or experimen
4、talapproaches may be used.1.3 The wide variety of textile products and the conditionsunder which consumers will use products prevents the inclu-sion of all types of wear trial experiments for research anddevelopment,product innovation studies,and special needssuch as those for healthcare industry or
5、 military.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior t
6、o use.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarrie
7、rs to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:22.1.1 Fabric and Apparel Tests:D2051 Test Method for Durability of Finish of Zippers toLaunderingD2052 Test Method for Colorfastness of Zippers to Dry-cleaningD2057 Test Method for Colorfastness of Zippers to Laun-deringD2058 Test M
8、ethod for Durability of Finish of Zippers toDrycleaningD3511 Test Method for Pilling Resistance and Other RelatedSurface Changes of Textile Fabrics:Brush Pilling TesterD3512 Test Method for Pilling Resistance and Other RelatedSurface Changes of Textile Fabrics:Random TumblePilling TesterD3514 Test M
9、ethod for Pilling Resistance and Other RelatedSurface Changes of Textile Fabrics:Elastomeric PadD3884 Guide for Abrasion Resistance of Textile Fabrics(Rotary Platform,Double-Head Method)D3885 Test Method for Abrasion Resistance of TextileFabrics(Flexing and Abrasion Method)D3886 Test Method for Abra
10、sion Resistance of TextileFabrics(Inflated Diaphragm Apparatus)D3938 Guide for Determining or Confirming Care Instruc-tions for Apparel and Other Textile ProductsD4157 Test Method for Abrasion Resistance of TextileFabrics(Oscillatory Cylinder Method)D4231 Practice for Evaluation of Launderable Woven
11、 DressShirts and Sports ShirtsD4390 Practice for Evaluation of the Performance of TerryBathroom Products for Household Use(Withdrawn1994)32.1.2 Other ASTM Standards:D123 Terminology Relating to TextilesD4850 Terminology Relating to Fabrics and Fabric TestMethodsD7022 Terminology Relating to Apparel2
12、.2 AATCC Standards:42.2.1 Colorfastness and Physical Properties:8 Colorfastness to Crocking:AATCC Crockmeter Method15 Colorfastness to Perspiration16 Colorfastness to Light61 Colorfastness to Laundering:Accelerated88B Smoothness of Seams in Fabrics After Repeated HomeLaundering1This guide is under t
13、he jurisdiction of ASTM Committee D13 on Textiles andis the direct responsibility of Subcommittee D13.60 on Fabric Test Methods,Specific.Current edition approved July 1,2019.Published July 2019.Originally approvedin 1973.Last previous edition approved in 2015 as D3181 151.DOI:10.1520/D3181-15R19.2Fo
14、r referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced
15、onwww.astm.org.4Annual AATCC Technical Manual,available from American Association ofTextile Chemists and Colorists,P.O.Box 12215,Research Triangle Park,NC 27709,www.aatcc.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis internationa
16、l standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 88C Appearance of Creases in Wash-and-Wear Items AfterHome Laundering96 Dimensional Changes in Commercial Laundering ofWoven and Knitted Fabrics Except Wool)116 Colorfastness to Crocking:Rotary Vertica