1、Designation:D324421aAn American National StandardStandard Practice forUtilization of Test Data to Determine Conformance withSpecifications1This standard is issued under the fixed designation D3244;the number immediately following the designation indicates the year oforiginal adoption or,in the case
2、of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe properties of commercial petroleum products are measured by standardized laboratory testmethod
3、s to assess their conformance to specifications.Two or more measurement results obtained byperforming the same test method for the same property of a specific sample usually will not benumerically identical.Therefore,the test methods generally include a paragraph on the precision ofresults.This prec
4、ision(or,a more appropriate term is imprecision)is an expression of the degree ofagreement that can be expected between the aforementioned measurements.Many difficulties that arise in assessing conformance to specifications are due to test imprecision.Because of this,a true value of a property can n
5、ever be determined exactly;and it is necessary to inferfrom measured values the range within which the“true value”is likely to lie.The main purpose of thispractice is to indicate how test imprecision should be interpreted relative to specification limit values.1.Scope*1.1 This practice covers guidel
6、ines and statistical method-ologies with which two parties(see Note 1)can compare andcombine independently obtained test results to obtain anAssigned Test Value(ATV)for the purpose of resolving adispute over product property conformance with specification.NOTE1Application of this practice is usually
7、,but not limited to,between supplier and receiver of a product.1.2 This practice defines a technique for establishing anAcceptance Limit(AL)and Assigned Test Value(ATV)toresolve the dispute over a property conformance with specifi-cation by comparing the ATV to the AL.1.3 This practice applies only
8、to those test methods whichspecifically state that the repeatability and reproducibilityvalues conform to the definitions herein.1.4 The statistical principles and methodology outlined inthis practice can also be used to obtain an ATV for specificationconformance decision when multiple results are o
9、btained forthe same batch of product within a single laboratory.For thisapplication,site precision(R)as defined in Practice D6299shall be used in lieu of test method published reproducibility(R).1.5 This international standard was developed in accor-dance with internationally recognized principles o
10、n standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D1319 Test Method for Hydrocarbon Types in
11、Liquid Petro-leum Products by Fluorescent Indicator AdsorptionD4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4177 Practice for Automatic Sampling of Petroleum andPetroleum ProductsD6299 Practice for Applying Statistical Quality Assuranceand Control Charting Techniques to Evalu
12、ate AnalyticalMeasurement System PerformanceD6300 Practice for Determination of Precision and BiasData for Use in Test Methods for Petroleum Products,Liquid Fuels,and LubricantsD6792 Practice for Quality Management Systems in Petro-leum Products,Liquid Fuels,and Lubricants TestingLaboratories1This p
13、ractice is under the jurisdiction of ASTM Committee D02 on PetroleumProducts,Liquid Fuels,and Lubricants and is the direct responsibility of D02.94 onCoordinating Subcommittee on Quality Assurance and Statistics.Current edition approved Oct.1,2021.Published October 2021.Originallypublished as an app
14、endix to the 1968 Annual Book of ASTM Standards,Part 18.Originally approved as a standard in 1974.Last previous edition approved in 2021as D3244 21.DOI:10.1520/D3244-21A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual B
15、ook of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international stan
16、dard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1D7372 Guide for Analysis and Interpretation of ProficiencyTest Program ResultsE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with Specifications2.2 ISO Standard:3ISO 4259 Deter