1、Designation:D428608(Reapproved 2021)Standard Practice forDetermining Coating Contractor Qualifications for NuclearPowered Electric Generation Facilities1This standard is issued under the fixed designation D4286;the number immediately following the designation indicates the year oforiginal adoption o
2、r,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This practice provides a criteria guide and proceduralmethod to assist utility owners
3、,architects,engineers,constructors,and other selection agencies in determining theoverall qualifications of a coating contractor to execute coatingwork for the primary containment and other safety-relatedfacilities of light-water nuclear power plants.1.2 The qualification criteria and requirements a
4、ddress theessential basic capability of a contractor to execute nuclearcoating work.Obviously,the specific capability to executethose requirements unique to a given project must also becarefully considered.The evaluation procedure contained inthis practice is designed to be adaptive to this detailed
5、 finalqualification process.Variation or simplification of the practiceis appropriate for non safety-related areas of nuclear powerplants,fossil fueled facilities,and other industrial projects.1.3 The overall capability of a contractor to successfullyexecute the varied and complex requirements of nu
6、clearcoating work is dependent upon competency in a variety ofessential categories.1.4 The nine evaluation categories described in Sections 3 12 detail the specific data to be provided by the contractor asessential to determining qualification status.In addition,a tenthuntitled category has been pro
7、vided on the evaluation workdescribed in Section 12 for inclusion of other informationpertinent to a specific project.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate
8、safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment o
9、f International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D3843 Practice for Quality Assurance for Protective Coat-ings Applied to Nuclear FacilitiesD4537 Guide for Establishing Proc
10、edures to Qualify andCertify Personnel Performing Coating and Lining WorkInspection in Nuclear Facilities2.2 American National Standards:3N 45.2.6 Qualifications of Inspection,Examination,andTesting Personnel for Nuclear Power PlantsNQA-1 Quality Assurance Requirements for Nuclear Facil-ity Applicat
11、ions2.3 Other Standard:10 CFR 50Appendix B Nuclear RegulatoryAgency,QualityAssurance Criteria for Nuclear Power Plants43.Personnel3.1 Home Offce Management and StaffResumes of thefollowingtypesofpersonnelincludingeducationalbackground,duration and degree of involvement in industrialcoating operation
12、s,qualifications,registrations,certifications,and specific experience in nuclear coating work.3.1.1 Principals and General Management.3.1.2 Engineering Manager.3.1.3 Project EngineersList specific nuclear coating workproject involvement.3.1.4 QA/QCManagerListspecificqualification/certification crede
13、ntials perANSI N 45.2.6,or Guide D4537,orNQA-1.3.2 General Field or Shop SupervisionResumes to in-clude specific nuclear coatings work experience.1This practice is under the jurisdiction of ASTM Committee D33 on ProtectiveCoating and Lining Work for Power Generation Facilities and is the directrespo
14、nsibility of Subcommittee D33.05 on Application and Surface Preparation.Current edition approved Feb.1,2021.Published February 2021.Originallyapproved in 1984.Last previous edition approved in 2015 as D4286 08(2015).DOI:10.1520/D4286-08R21.2For referenced ASTM standards,visit the ASTM website,www.as
15、tm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Available from American National Standards Institute(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.4Avai
16、lable from U.S.Government Printing Office Superintendent of Documents,732 N.Capitol St.,NW,Mail Stop:SDE,Washington,DC 20401,http:/www.access.gpo.gov.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by