1、Designation:D223504(Reapproved 2016)Standard Specification forSolvent Cement for Acrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe and Fittings1This standard is issued under the fixed designation D2235;the number immediately following the designation indicates the year oforiginal adoption or,in the c
2、ase of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers solvent cement for joiningacrylonitrile-butadiene styrene(ABS)plastic
3、 pipe and fittingsfor pressure and nonpressure systems.1.2 Recommendation for using solvent cement for joiningacrylonitrile-butadiene-styrene(ABS)plastic pipe and fittingsis given in Appendix X1.Satisfactory joining of pipe andfittings cannot be made in the presence of water,as waterdestroys the bon
4、ding ability of solvent cement;therefore,allmaterials must be dry for satisfactory joining.1.3 The text of this specification references notes,footnotes,and appendixes which provide explanatory material.Thesenotes and footnotes(excluding those in tables and figures)shallnot be considered as requirem
5、ents of the specification.1.4 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.5 The following safety hazards caveat pertains only to the
6、test methods portion,Section 7,of this specification:Thisstandard does not purport to address all of the safety concerns,if any,associated with its use.It is the responsibility of the userof this standard to establish appropriate safety and healthpractices and determine the applicability of regulato
7、ry limita-tions prior to use.2.Referenced Documents2.1 ASTM Standards:2D329 Specification for AcetoneD618 Practice for Conditioning Plastics for TestingD740 Specification for Methyl Ethyl KetoneD883 Terminology Relating to PlasticsD1084 Test Methods for Viscosity of AdhesivesD1527 Specification for
8、Acrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe,Schedules 40 and 80(Withdrawn2013)3D2282 Specification for Acrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe(Withdrawn 2006)3D2465 Specification for Threaded Acrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe Fittings,Schedule 80(With-drawn 1985)3D2468 S
9、pecification for Acrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe Fittings,Schedule 40(Withdrawn2003)3D2469 SpecificationforSocket-TypeAcrylonitrile-Butadiene-Styrene(ABS)Plastic Pipe Fittings,Schedule80(Withdrawn 1985)3D2661 Specification for Acrylonitrile-Butadiene-Styrene(ABS)Schedule 40 Plastic
10、Drain,Waste,and Vent Pipeand FittingsD2680 Specification for Acrylonitrile-Butadiene-Styrene(ABS)and Poly(Vinyl Chloride)(PVC)Composite SewerPipingD2750 Specification for Acrylonitrile-Butadiene-Styrene(ABS)Plastics Utilities Conduit and Fittings(Withdrawn1997)3D2751 Specification for Acrylonitrile-
11、Butadiene-Styrene(ABS)Sewer Pipe and Fittings(Withdrawn 2014)3D1600 Terminology forAbbreviated Terms Relating to Plas-ticsD3965 Classification System and Basis for Specifications forRigid Acrylonitrile-Butadiene-Styrene(ABS)Materialsfor Pipe and FittingsF402 Practice for Safe Handling of Solvent Cem
12、ents,Primers,and Cleaners Used for Joining ThermoplasticPipe and FittingsF409 Specification for Thermoplastic Accessible and Re-placeable Plastic Tube and Tubular FittingsF412 Terminology Relating to Plastic Piping SystemsF493 Specification for Solvent Cements for ChlorinatedPoly(Vinyl Chloride)(CPV
13、C)Plastic Pipe and Fittings1This specification is under the jurisdiction of ASTM Committee F17 on PlasticPiping Systems and is the direct responsibility of Subcommittee F17.20 on Joining.Current edition approved Nov.1,2016.Published November 2016.Originallyapproved in 1963.Last previous edition appr
14、oved 2011 as D2235 04(2011).DOI:10.1520/D2235-04R16.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last appr
15、oved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 F628 Specification for Acrylonitrile-Butadiene-Styrene(ABS)Schedule 40 Plastic Drain,Waste,and Vent PipeWith a Cellular
16、Core2.2 Federal Standard:Fed.Std.123 Marking for Shipment(Civil Agencies)42.3 Military Standard:MIL STD-129 Marking for Shipment and Storage42.4 National Sanitation Foundation Standards:Standard No.14 Plastic Piping Components and RelatedMaterials5Standard No.61 for Drinking Water Systems ComponentsHealth Effects53.Terminology3.1 Definitions are in accordance with Terminologies D883and F412.Abbreviations are in accordance with TerminologyD1600 unless otherwise indicated.The abbreviation forAcryl