1、Designation:F281010An American National StandardStandard Specification forElliptical Trainers1This standard is issued under the fixed designation F2810;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A numbe
2、r in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe goal of this specification is to promote proper design and manufacturing practices for ellipticaltraining equipment.Through these specifica
3、tions this standard aims to assist designers and manufac-turers in reducing the possibility of injury when these products are used in accordance with theoperational instructions.The equipment user must recognize,however,that a standard alone will not necessarily preventinjuries.Like other physical a
4、ctivities,exercise involving fitness equipment involves the risk of injury,particularly if the equipment is used improperly or not properly maintained.In addition,users withphysical limitations should seek medical advice or instruction from the fitness facility,or both,priorto using this equipment.C
5、ertain physical conditions or limitations may preclude some persons fromusing this equipment properly and without increasing the risk of serious injury.1.Scope1.1 This specification establishes parameters for the designand manufacture of elliptical training equipment as defined in3.1 for use in an i
6、ndoor environment or setting.1.2 It is the intent of this standard to specify fitness productsfor use only by an individual age 13 or older.1.3 This standard is to be used in conjunction with Speci-fication F2276 and Test Methods F2811.All specifications inthis standard supersede those of Specificat
7、ion F2276 whereapplicable.1.4 The values stated in SI units are to be regarded asstandard.The values in parentheses are for information only.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to
8、establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2F1749 Specification for Fitness Equipment and Fitness Fa-cility Safety Signage and LabelsF2276 Specification for Fitness EquipmentF2571
9、 Test Methods for Evaluating Design and PerformanceCharacteristics of Fitness EquipmentF2811 Test Methods for Evaluating Design and PerformanceCharacteristics of Elliptical Trainers3.Terminology3.1 DefinitionsThe terms listed below are unique to thisspecification.For terms not defined below,refer to
10、 Specifica-tion F2276.3.1.1 adjustable guide system,ncomponents that allowthe user to vary the angle or position of a guide surface.3.1.2 control panel,nequipment/user interface device forcontrolling the operation of,or displaying information aboutthe operational state of the equipment.3.1.3 ellipti
11、cal trainer,ntraining equipment that can pro-duce a continuous,predominately elliptical motion path.Ellip-tical training functions as a continuous non-circular closed loopcycle.3.1.4 fixed handlebar,nhandlebars that are stationary.3.1.5 foot support,na device designed to support the footwhile the us
12、er is correctly performing the exercise as intendedby the manufacturer,or while the user mounts or dismounts theequipment.Illustrated in Fig.1.3.1.6 handlebar,nthe means that are provided to a user toenhance balance and stability.Handlebars shall be defined bythe manufacturer as the intended grippab
13、le zone.1This specification is under the jurisdiction of ASTM Committee F08 on SportsEquipment,Playing Surfaces,and Facilities and is the direct responsibility ofSubcommittee F08.30 on Fitness Products.Current edition approved May 1,2010.Published June 2010.DOI:10.1520/F2810-10.2For referenced ASTM
14、standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 194
15、28-2959.United States1 3.1.7 movable handlebar,nthe moving means that areprovided for a user to engage the upper body during theexercise.4.Equipment Types4.1 Elliptical Trainer With Fixed Handlebars(Type 1)Handlebars are in a fixed position and are not intended toprovide guided or un-guided motion o
16、f the users upper body,as shown in Fig.2.4.2 Elliptical Trainer With Moveable Handlebars(Type2)Handlebars are configured to provide for guided or un-guided motion of the users upper body,as shown in Fig.3.4.3 Elliptical Trainer With Moveable and Fixed Handlebars(Type 3)Exercise equipment that contains both fixed andmoveable handlebars as described in 4.1 and 4.2,as shown inFig.4.5.Design and Construction RequirementsNOTE1In addition to the requirements of Specification F2276,thefollowing require