1、Designation:F308414Standard Consumer Safety Specification forInfant and Infant/Toddler Rockers1This standard is issued under the fixed designation F3084;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A numb
2、er in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis consumer safety specification is intended to minimize the risk of injury or death associatedwith a childs use of an infant or infant/todd
3、ler rocker.The specific hazards addressed by thisspecification are product disassembly/collapse,stability,and falls from elevated surfaces.1.Scope1.1 This consumer safety specification covers establishmentof requirements,test methods,and marking requirements topromote safe use of the rocker by an oc
4、cupant and a caregiver.1.2 For purposes of this consumer safety specification,aninfant rocker or infant/toddler rocker is a freestanding productintended to support an occupant in a seated,reclined positionand to facilitate rocking by the occupant with the aid of acaregiver or by other means.Intended
5、 occupants for infantrockers are infants who have not developed the ability to sit upunassisted(approximately 0 to 6 months of age),and infant/toddler rockers have an extended use with occupants untiltoddler age(approximately 212years of age).Both infant andinfant/toddler rockers include a restraint
6、 system.1.3 This specification does not cover positions or modes onproducts that recline to 10 or less above the horizontal or areintended primarily for sleeping.If the rocker can be convertedinto a product for which an ASTM standard consumer safetyspecification exists,the product shall meet the app
7、licablerequirements of that standard.For example,a rocker thatconverts to a bassinet shall also comply with the applicablerequirements of Consumer Safety Specification F2194 when ina bassinet mode.This specification does not cover rockersintended for toddler only use without a restraint system,hand-
8、held infant carriers or inclined sleep products that havethe ability to rock or have a rocking mode.1.4 This consumer safety specification is intended to mini-mize the risk of injury to an occupant resulting from normaluse and reasonably foreseeable misuse or abuse of an infant orinfant/toddler rock
9、er.1.5 No rocker produced after the approval date of thisconsumer safety specification shall,either by label or othermeans,indicate compliance with this specification unless itconforms to all requirements contained herein.1.6 This consumer safety specification is not intended toaddress incidents and
10、 injuries resulting from the interaction ofother persons with the occupant in the product or the incidentsresulting from abuse or misuse by other children.1.7 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units t
11、hat are provided for information onlyand are not considered standard.1.8 The following precautionary caveat pertains only to thetest method portion,Section 7,of this consumer safety speci-fication:This standard does not purport to address all of thesafety concerns,if any,associated with its use.It i
12、s theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D3359 Test Methods for Measuring Adhesion by Tape TestF963 Consumer Safety Specific
13、ation for Toy SafetyF2050 Consumer Safety Specification for Hand-Held InfantCarriersF2167 Consumer Safety Specification for Infant BouncerSeatsF2194 Consumer Safety Specification for Bassinets andCradles2.2 EN Standards:EN12790:2009 Child use and care articlesReclinedcradles1This consumer safety spe
14、cification is under the jurisdiction of ASTM Commit-tee F15 on Consumer Products and is the direct responsibility of SubcommitteeF15.18 on Cribs,Toddler Beds,PlayYards,Bassinets,Cradles and Changing Tables.Current edition approved May 1,2014.Published July 2014.DOI:10.1520/F3084-14.2For referenced A
15、STM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA
16、 19428-2959.United States1 2.3 Federal Regulations:16 CFR 1303 Ban of Lead-Containing Paint and CertainConsumer Products Bearing Lead-Containing Paint16 CFR 1500.48 Technical Requirements for Determining aSharp Point in Toys or Other Articles Intended for Use byChildren Under Eight Years of Age16 CFR 1500.49 Technical Requirements for Determining aSharp Metal or Glass Edge in Toys or Other ArticlesIntended for Use by Children Under Eight Years of Age16 CFR 1500.50-.52 Test Methods for Simulating