1、Designation:F269808(Reapproved 2013)Standard Guide forFences for Above-Ground and In-ground Skate ParkFacilities1This standard is issued under the fixed designation F2698;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of la
2、st revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide provides recommended minimum require-ments for denoting the various types of fences/barriers forskate parks and fo
3、r inline skating or roller hockey rinks andextreme performance areas.1.2 This guide provides the minimum requirements for theprotection of the participants from intrusion of other activityusers;from unauthorized and unsupervised use by users thatcould be harmed by unanticipated entry into the area a
4、nd fromfalls into in-ground skate park area.1.3 This guide provides for the safety of spectators fromerrant skateboard use.1.4 The values stated in inch-pound units are to be regardedas the standard.The SI values in parentheses are provided forinformation purposes only.1.5 This standard does not pur
5、port to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2A392 S
6、pecification for Zinc-Coated Steel Chain-Link FenceFabricA491 Specification for Aluminum-Coated Steel Chain-LinkFence FabricF537 Specification for Design,Fabrication,and Installationof Fences Constructed of Wood and Related MaterialsF552 Terminology Relating to Chain Link FencingF668 Specification f
7、or Polyvinyl Chloride(PVC),Polyolefinand Other Polymer-Coated Steel Chain Link Fence FabricF900 Specification for Industrial and Commercial SteelSwing GatesF964 Specification for Rigid Poly(Vinyl Chloride)(PVC)Exterior Profiles Used for Fencing and RailingF1043 Specification for Strength and Protect
8、ive Coatings onSteel Industrial Fence FrameworkF1083 Specification for Pipe,Steel,Hot-Dipped Zinc-Coated(Galvanized)Welded,for Fence StructuresF1345 Specification for Zinc-5%Aluminum-MischmetalAlloy-Coated Steel Chain-Link Fence FabricF2408 Specification for Ornamental Fences Employing Gal-vanized S
9、teel Tubular PicketsF2453/F2453M Specification for Welded Wire Mesh FenceFabric(Metallic-Coated or Polymer Coated)for Meshesof 6 in.23871 mm2 or Less,in Panels or Rolls,withUniform MeshesF2589 Specification for Ornamental Fences Employing SteelTubular Pickets3.Terminology3.1 See Terminology F552 for
10、 definitions of terms relatingto chain-link fencing.3.2 Definitions of Terms Specific to This Standard:3.2.1 fence,na type of barrier that surrounds and obstructsaccess to the skate park.Examples:chain link,wood,ornamental,PVC extrusions.3.2.2 grade,nthe finished elevation at any specified pointof t
11、he ground or pavement outside the skate park.4.Summary of Guide4.1 This guide is based in part upon findings of the UnitedStates Consumer Product Safety Commission(CPSC),theAmerican Association of Pediatrics,the National Center forInjury Prevention,the National Recreation and Park Associa-tion and t
12、he American Medical Association.It also incorpo-rates certain provisions of the ASTM Committee F08 TaskGroups on Skate Park Standards.5.Significance and Use5.1 This guide sets forth minimum standard requirementsfor use in local codes and ordinances relating to fences/barriersseparating pedestrian ci
13、rculation and traffic areas from skate1This guide is under the jurisdiction of ASTM Committee F14 on Fences and isthe direct responsibility of Subcommittee F14.10 on Specific Applications.Current edition approved March 1,2013.Published March 2013.Originallyapproved in 2008.Last previous edition appr
14、oved in 2008 as F2698-08.DOI:10.1520/F2698-08R13.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM In
15、ternational,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 park and related venue enclosures to prevent collision,containthe skateboards and prevent falls into such in-ground venueareas.5.2 This guide sets forth minimum standard requirementsfor use in local codes an
16、d ordinances relating to enclosing skateparks and preventing unfamiliar use of the facilities creatingfalls from hazards.5.3 This guide does not have the effect of law,nor is itintended to supersede local codes and ordinances of a morerestrictive nature.5.4 Studies have been the basis for certain recommendationsin this guide and will assist those who intend to provideprotection against unfamiliar access by restricting access tochildren under the age of five years who have no training andothers u