1、AN AMERICAN NATIONAL STANDARD Tool Life Testing With Single-Point Turning Tools ANSI/ASME 894.55M-1985 REVISION OF ANSI B94.34-1946(R1971)AND B94.36-1956(R1971)SPONSORED AND PUBLISHED BY THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS United Engineering Center 345 East 47th Street New York,N.Y.l 0017 R
2、EAFFIRMED 2014FOR CURRENT COMMITTEE PERSONNELPLEASE E-MAIL CSasme.orgDate of Issuance:April 15,1986 This Standard will be revised when the Society approves the issuance of a new edition.There will be no addenda or written interpretations of the requirements of this Standard issued to this Edition.Th
3、is code or standard was developed under procedures accredited as meeting the criteria for American National Standards.The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate.The p
4、roposed code or standard was made available for public review and comment which provides an opportunity for additional public input from industry,academia,regulatory agencies,and the public-at-large.ASME does not approve,rate,or endorse any item,construction,proprietary device,or activity.ASME does
5、not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document,and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable Letters Patent,nor assume any such liability.User
6、s of a code or standard are expressly advised that determination of the validity of any such patent rights,and the risk of infringement of such rights,is entirely their own responsibility.Participation by federal agency representative(s)or person(sl affiliated with industry is not to be interpreted
7、as government or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations issued in accordance with governing ASME procedures and policies which preclude the issuance of interpretations by individual volunteers.No part of this document may be reproduce
8、d in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.Copyright 1986 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Printed in U.S.A.FOREWORD(This Foreword is not part of ANSI/ASME B94.55M-1985.)This Standard is a slig
9、htly modified version of ISO 3685-1977,Tool Life Testing With Single-Point Turning Tools.Only several small changes have been made,such as replacing referenced ISO materials specifications with ASTM and ANSI specifications.It was felt that U.S.users of the Standard would be more familiar with the AS
10、TM and ANSI specifications and have easier access to them.Following approval by the B94 Standards Committee and ASME,this Standard was submitted to ANSI and approved as an American National Standard on November 27,1985.iii Intentionally left blank ASME STANDARDS COMMITTEE B94 Standardization of Cutt
11、ing Tools,Holders,Drivers,and Bushings(The following is the roster of the Committee at the time of the approval of the Standard.I OFFICERS E.J.Czopor,Chairman W.R.Daisak,Secretary COMMITTEE PERSONNEL AMERICAN SOCIETY OF MECHANICAL ENGINEERS,THE M.E.Merchant,Metcut Research Associates,Inc.Cincinnati,
12、OhioG.F.Wilson,Alternate,General Electric Co.,Worthington,OhioCUTTING TOOL MANUFACTURERS OF AMERICA E.J.Czopor,Falcon Tool Co.,Warren,Michigan C.W.Jatho,Alternate,Cutting Tool Manufacturers of America,Birmingham,MichiganGENERAL SERVICES ADMINISTRATION W.R.Wacker,General Services Administration,Washi
13、ngton,DC HACK AND BAND SAW MANUFACTURERS ASSOCIATION OF AMERICA R.Schrade,Clemson Brothers,Inc.Middletown,New YorkC.M.Stockinger,Alternate,Hack and Band Saw Manufacturers Association,Cleveland,OhioMETAL CUTTING TOOL INSTITUTE W.A.Wagner,Cleveland Twist Drill Co.,Cleveland,Ohio J.G.Thimmig,Alternate,
14、Metal Cutting Tool Institute,Cleveland,Ohio NATIONAL MACHINE TOOL BUILDERS ASSOCIATION J.J.Robinson,Valeron Corp.,Troy,Michigan A.M.Bratkovich,Alternate,National Machine Tool Builders Association,McLean,Virginia SOCIETY OF MANUFACTURING ENGINEERS G.L.Spencer,Ford Motor Co.,Detroit,Michigan UNITED ST
15、ATES DEPARTMENT OF THE ARMY D.L York,Liaison,Material Readiness Command,Rock Island,Illinois INDIVIDUAL MEMBERS A.Ashbum.American Machinist,New York,New YorkH.Cooper,Water Technology,Inc.,Troy,MichiganR.T.Koblesky,Ingersoll Cutting Tool Co.,Rockford,IllinoisJ.A.Lang,Dayton Progress Corp.,Dayton,Ohio
16、 L Storrer,Mohawk Tools,Inc.,Montpelier,OhioV PERSONNEL OF TECHNICAL COMMITTEE 4-LIFE TESTING WITH SINGLE-POINT TOOLS M.E.Merchant,Chairman,Metcut Research Associates,Inc.,Cincinnati,Ohio R.M.Byme,Trade Association Management,Inc.,Tarrytown,New York D.D.Jackson.Vaferon Corp.,Warren,Michigan J.Johnston,General Electric Co.,Warren,Michigan J.F.Kahles,Metcut Research Associates,Cincinnati,Ohio J.D.Knox,Vermont American Corp.,Louisville,Kentucky vi CONTENTS Foreword.iii Standards Committee Roster.v