1、Designation:E177709(Reapproved 2015)Standard Guide forPrioritization of Data Needs for Pavement Management1This standard is issued under the fixed designation E1777;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last rev
2、ision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide identifies data needs for pavement manage-ment systems.It also addresses the relative importance ofvarious types of pave
3、ment data.1.2 This guide was developed for use by federal,state,andlocal agencies,as well as consultants who provide services tothose agencies.1.3 This guide describes a process and provides a set ofrecommendations that any agency may use to develop a planfor acquiring pavement management data.Any i
4、ndividualagency may justifiably assign higher or lower priority tospecified data items depending on their needs and policy.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-pr
5、iate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D3319 Practice for the Accelerated Polishing of AggregatesUsing the British WheelD4123 Test Method for Indirect Tension Test for ResilientModulus of Bitu
6、minous Mixtures(Withdrawn 2003)3D4602 Guide for Nondestructive Testing of Pavements Us-ing Cyclic-Loading Dynamic Deflection EquipmentD4694 Test Method for Deflections with a Falling-Weight-Type Impulse Load DeviceD4695 Guide for General Pavement Deflection Measure-mentsD4748 Test Method for Determi
7、ning the Thickness of BoundPavement Layers Using Short-Pulse RadarD5340 Test Method for Airport Pavement Condition IndexSurveysD6433 Practice for Roads and Parking Lots Pavement Con-dition Index SurveysE274 Test Method for Skid Resistance of Paved SurfacesUsing a Full-Scale TireE303 Test Method for
8、Measuring Surface Frictional Proper-ties Using the British Pendulum TesterE445/E445M Test Method for Stopping Distance on PavedSurfaces Using a Passenger Vehicle Equipped With Full-Scale TiresE501 Specification for Rib Tire for Pavement Skid-Resistance TestsE503/E503M Test Methods for Measurement of
9、 Skid Resis-tance on Paved Surfaces Using a Passenger VehicleDiagonal Braking Technique(Withdrawn 2010)3E524 Specification for Smooth Tire for Pavement Skid-Resistance TestsE556 Test Method for Calibrating a Wheel Force or TorqueTransducer Using a Calibration Platform(User Level)E660 Practice for Ac
10、celerated Polishing of Aggregates orPavement Surfaces Using a Small-Wheel,Circular TrackPolishing Machine(Withdrawn 2006)3E670 Test Method for Testing Side Force Friction on PavedSurfaces Using the Mu-MeterE770 Test Method for Classifying Pavement Surface Tex-tures(Withdrawn 1991)3E867 Terminology R
11、elating to Vehicle-Pavement SystemsE950 Test Method for Measuring the Longitudinal Profile ofTraveled Surfaces with an Accelerometer EstablishedInertial Profiling ReferenceE965 Test Method for Measuring Pavement MacrotextureDepth Using a Volumetric TechniqueE1082 Test Method for Measurement of Vehic
12、ular Responseto Traveled Surface RoughnessE1166 Guide for Network Level Pavement ManagementE1170 Practices for Simulating Vehicular Response to Lon-gitudinal Profiles of Traveled SurfacesE1215 Specification for Trailers Used for Measuring Vehicu-lar Response to Road Roughness1This guide is under the
13、 jurisdiction of ASTM Committee E17 on Vehicle-Pavement Systems and is the direct responsibility of Subcommittee E17.42 onPavement Management and Data Needs.Current edition approved May 1,2015.Published August 2015.Originallyapproved in 1996.Last previous edition approved in 2009 as E1777 09.DOI:10.
14、1520/E1777-09R15.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical sta
15、ndard is referenced onwww.astm.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 E1274 Test Method for Measuring Pavement RoughnessUsing a ProfilographE1337 Test Method for Determining Longitudinal PeakBraking Coefficient of Paved Surfa
16、ces Using StandardReference Test TireE1911 Test Method for Measuring Paved Surface FrictionalProperties Using the Dynamic Friction TesterE1926 Practice for Computing International Roughness In-dex of Roads from Longitudinal Profile Measurements2.2 Other Publications:Guidelines on Pavement Management,AASHTO(1990)4AASHTOGuideforDesignofPavementStruc-tures,AASHTO(1986)4FHWAPavement Policy for Highways,Federal Register,Vol54,No.8 pp.135358(Jan.13,1989)5Pavement Management Practices,NCHRP Synthesis13
