1、Designation:E126612Standard Practice forProcessing Mixtures of Lime,Fly Ash,and Heavy MetalWastes in Structural Fills and Other ConstructionApplications1This standard is issued under the fixed designation E1266;the number immediately following the designation indicates the year oforiginal adoption o
2、r,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This practice provides descriptions and references ofexisting test methods and commer
3、cial practices relating to theprocessing of lime,fly ash,and heavy metal wastes inconstruction applications.1.2 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and
4、 health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2C5 Specification for Quicklime for Structural PurposesC25 Test Methods for Chemical Analysis of Limestone,Quicklime,and Hydrated LimeC109/C109M Test Method for Compress
5、ive Strength ofHydraulic Cement Mortars(Using 2-in.or 50-mm CubeSpecimens)C110 Test Methods for Physical Testing of Quicklime,Hydrated Lime,and LimestoneC206 Specification for Finishing Hydrated LimeC207 Specification for Hydrated Lime for Masonry Pur-posesC311 Test Methods for Sampling and Testing
6、Fly Ash orNatural Pozzolans for Use in Portland-Cement ConcreteC400 Test Methods for Quicklime and Hydrated Lime forNeutralization of Waste AcidC593 Specification for Fly Ash and Other Pozzolans for UseWith Lime for Soil StabilizationC618 Specification for Coal Fly Ash and Raw or CalcinedNatural Poz
7、zolan for Use in ConcreteC821 Specification for Lime for Use with PozzolansC911 Specification for Quicklime,Hydrated Lime,andLimestone for Selected Chemical and Industrial UsesC977 Specification for Quicklime and Hydrated Lime forSoil StabilizationD559 Test Methods for Wetting and Drying CompactedSo
8、il-Cement Mixtures(Withdrawn 2012)3D560 Test Methods for Freezing and Thawing CompactedSoil-Cement Mixtures(Withdrawn 2012)3D1557 Test Methods for Laboratory Compaction Character-istics of Soil Using Modified Effort(56,000 ft-lbf/ft3(2,700 kN-m/m3)D1633 Test Methods for Compressive Strength of Molde
9、dSoil-Cement CylindersD2434 Test Method for Permeability of Granular Soils(Constant Head)D2435 Test Methods for One-Dimensional ConsolidationProperties of Soils Using Incremental LoadingD3877 Test Methods for One-Dimensional Expansion,Shrinkage,and Uplift Pressure of Soil-Lime MixturesD3987 Practice
10、 for Shake Extraction of Solid Waste withWaterD4318 Test Methods for Liquid Limit,Plastic Limit,andPlasticity Index of SoilsD5681 Terminology for Waste and Waste ManagementE850 Guide for Characterization of Inorganic ProcessWastes for Use as Structural Fill2.2 Environmental Protection Agency Documen
11、ts:EPA/600/R-09-148 Technology Performance Review:Se-lecting and Using Solidification/Stabilization Treatmentfor Site Remediation,41This practice is under the jurisdiction of ASTM Committee D34 on WasteManagement and is the direct responsibility of Subcommittee D34.03 on Treatment,Recovery and Reuse
12、.Current edition approved Dec.15,2012.Published January 2013.Originallyapproved in 1988.Last previous edition approved in 2005 as E1266-88(2005).DOI:10.1520/E1266-12.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book
13、of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4National Risk Management Research Laboratory,Office of Research andDevelopment,U.S.Environmental Protection Agency,
14、Cincinnati,OH,November2009,http:/www.epa.gov/nrmrl/pubs/600r09148/600r09148.pdfCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 EPA Resource Conservation and Recovery Act(RCRA)5EPA SW-846 Test Methods for Evaluating Solid Waste,Physical/Ch
15、emical Methods6EPA SW-872 Properties of Stabilized/Solidified Waste6RCRA Document EPA-IAG-D4-0569 Guide to the Disposalof Chemically Stabilized and Solidified Waste6Hazardous and Solid Waste Amendments(HSWA)Method 1311 Toxicity Characteristic Leaching Procedure6Method 9095 Paint Filter Liquid Test(P
16、FLT)6EPA/530-R-93-007 Petitions to Delist Hazardous Waste:AGuidance Manual(Second Edition),NTIS:PB 93-169-3656EPA/530-SW-86-016 OSWERPolicyDirectiveNo.9487.00-2A,Prohibition on the Placement of Bulk LiquidHazardous Waste in Landfills Statutory Interpretive Guid-ancehttp:/nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=9100MTSR.txt6EPA/540-2-86-001HandbookforStabilization/Solidification of Hazardous Waste,Superfund Document62.3 Code of Federal Regulations:40 CFR 264 Subpart B,section 264.13,Hazardous WasteMa
