1、Designation:D786215aStandard Specification forButanol for Blending with Gasoline for Use as AutomotiveSpark-Ignition Engine Fuel1This standard is issued under the fixed designation D7862;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revisio
2、n,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers butanol intended to be blendedwith gasoline at 1%to 12.5%by volume for use as anau
3、tomotive spark-ignition engine fuel.1.1.1 Butanol contains 22%by mass oxygen.The masspercent of oxygen of a butanol blend with gasoline depends onthe volume percent of butanol blended,the density of thebutanol isomer,and the density of the base blendstock.1.1.2 The maximum limit on blending is not a
4、 performancelimit but a current regulatory limit in the United States.1.2 This specification covers three butanol isomers:1-butanol,2-butanol,and 2-methyl-1-propanol.This specifica-tion specifically excludes 2-methyl-2-propanol(that is,tert-butyl alcohol).1.2.1 Tert-butyl alcohol has different physi
5、cal properties(melting point,water miscibility)than the other three isomers.1.3 The values stated in SI units are to be regarded asstandard.No other units of measurement are included in thisstandard.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its us
6、e.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D381 Test Method for Gum Content in Fuels by Jet Evapo-rationD1298 Test Metho
7、d for Density,Relative Density,or APIGravity of Crude Petroleum and Liquid Petroleum Prod-ucts by Hydrometer MethodD1613 Test Method for Acidity in Volatile Solvents andChemical Intermediates Used in Paint,Varnish,Lacquer,and Related ProductsD2622 Test Method for Sulfur in Petroleum Products byWavel
8、ength Dispersive X-ray Fluorescence SpectrometryD3120 Test Method for Trace Quantities of Sulfur in LightLiquid Petroleum Hydrocarbons by Oxidative Microcou-lometryD4052 Test Method for Density,Relative Density,and APIGravity of Liquids by Digital Density MeterD4057 Practice for Manual Sampling of P
9、etroleum andPetroleum ProductsD4175 Terminology Relating to Petroleum,PetroleumProducts,and LubricantsD4177 Practice for Automatic Sampling of Petroleum andPetroleum ProductsD4306 Practice for Aviation Fuel Sample Containers forTests Affected by Trace ContaminationD4814 Specification for Automotive
10、Spark-Ignition EngineFuelD5453 Test Method for Determination of Total Sulfur inLight Hydrocarbons,Spark Ignition Engine Fuel,DieselEngine Fuel,and Engine Oil by Ultraviolet FluorescenceD5854 Practice for Mixing and Handling of Liquid Samplesof Petroleum and Petroleum ProductsD6299 Practice for Apply
11、ing Statistical Quality Assuranceand Control Charting Techniques to Evaluate AnalyticalMeasurement System PerformanceD7319 Test Method for Determination of Existent and Po-tential Sulfate and Inorganic Chloride in Fuel Ethanol andButanol by Direct Injection Suppressed Ion Chromatog-raphyD7875 Test M
12、ethod for Determination of Butanol and Ac-etone Content of Butanol for Blending with Gasoline byGas ChromatographyE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE203 Test Method for Water Using Volumetric Karl FischerTitrationE300 Practice for Sampl
13、ing Industrial ChemicalsE1064 Test Method for Water in Organic Liquids by Coulo-metric Karl Fischer Titration1This specification is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct responsibility ofSubcommittee D02.A0 on Gasoline and Oxy
14、genated Fuels.Current edition approved Oct.1,2015.Published October 2015.Originallyapproved in 2013.Last previous edition approved in 2015 as D7862 15.DOI:10.1520/D7862-15A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annua
15、l Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 3.Terminology3.1 F
16、or general terminology,refer to Terminology D4175.NOTE1The user is advised that the definitions used by variousindustries,marketers,and regulatory bodies can differ from those specificto this specification.It is the responsibility of the user to ensure that theterms used in a particular context are clearly understood.3.2 Definitions:3.2.1 gasoline,navolatilemixtureofliquidhydrocarbons,generally containing small amounts ofadditives,suitable for use as a fuel in spark-ignition,internalcombustion e