1、Designation:D821720Standard Guide forAccess Control System1This standard is issued under the fixed designation D8217;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year
2、 of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide covers the recommended access controlsystem for protecting resin cannabis,resin cannabis products,resin cannabis waste,currency,people,property,and assets.1.2 UnitsThe
3、values stated in inch-pound units are to beregarded as standard.The values given in parentheses aremathematical conversions to SI units that are provided forinformation only and are not considered standard.1.3 This standard does not purport to address all of thesafety concerns,if any,associated with
4、 its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.The recommendations herein are offered as the minimumrequirement.All standards are subject to the
5、requirements ofthe local Authority Having Jurisdiction(AHJ)in any givenarea.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and R
6、ecom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Terminology2.1 Definitions of Terms Specific to This Standard:2.1.1 access control software,ntrack staff by recordingaccess point ingress activities while at the same time enhancingthe overall safety of
7、 the property;sounds an alert whenanomalies detected;accessibility via the Internet.2.1.2 authentication,vverifying the identity of a user foran access control device that ensures the individual using thedevice is authorized access.2.1.3 authorityhavingjurisdiction(AHJ),ntheorganization,office,or in
8、dividual responsible for issuingpermits,approving layout drawings,equipment,enforcing therequirements of a code or standard or approving materials,aninstallation or procedure.Usually the AHJ is the building orfire official of the city or county in which the job site is located.In some cases,such as
9、healthcare facilities,transient accom-modations and day care facilities,the AHJ is the city or countybuilding or fire official.2.1.4 digital video recorder(DVR),nrecords data in adigital format to a local or networked mass storage device.2.1.5 dual-locked storage container,nlock that requiretwo indi
10、viduals to open;the dual custody classified lockprogrammed to require two combinations or keys to open.2.1.6 electric strike,noperates by means of electriccurrent,connected to an access control system,remotelymonitored and controlled,both to lock and unlock.2.1.7 interlock,nwhereby only a single doo
11、r shall open atany point in time;once a door is open,all other doors in theroom that are part of the interlock are prevented from opening.2.1.8 Internet protocol(IP),ndata sent over the Internet orother network.2.1.9 magnetic lock,nlarge electro-magnet mounted onthe door frame and a corresponding ar
12、mature mounted on thedoor;when the magnet is powered and the door is closed,thearmature is held fast to the magnet to secure the door.2.1.10 man trap,nlocked room whereby only a singledoor shall open at any point in time;once a door is open,allother doors in the room that are part of the man trap ar
13、eprevented from opening.2.1.11 personal identification number(PIN),nfour-tosix-digit code assigned to individuals and inputted onto akeypad for access.2.1.12 sally port,nlocked enclosure for vehicles wherebyonly a single door shall open at any point in time;once a dooris open,all other doors in the
14、enclosure that are part of the sallyport are prevented from opening.2.1.13 three-factor authentication,nat least three of thefollowing:an access control credential(for example,badge,FOB,wireless device),personal identification number(PIN),or biometric,or combinations thereof.2.1.14 two-factor authen
15、tication,nat least two of thefollowing:an access control credential(for example,badge,FOB,wireless device),personal identification number(PIN),or biometric,or combinations thereof.1This guide is under the jurisdiction of ASTM Committee D37 on Cannabis andis the direct responsibility of Subcommittee
16、D37.05 on Security and Transportation.Current edition approved Feb.1,2020.Published February 2020.DOI:10.1520/D8217-20.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization T
