1、Designation:D829919Standard Guide forUsing Metal Ratios in Soils to Distinguish BetweenAnthropogenic and Natural Beryllium1This standard is issued under the fixed designation D8299;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the
2、year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide describes a general approach to planninginvestigations in which the goal is to obtain backgroundmeasurem
3、ents of naturally occurring Beryllium(N-Be)alongwith one or more predictor metals in local soils,to be used inpredicting the amount of N-Be expected in samples taken forevaluation using the Metal Ratio Method(MRM).Generally,systematic random sampling is recommended,after which theresults are interpr
4、eted using statistical methods described inthis guide.1.2 The total Be(T-Be)measured in evaluation samples canthen be compared with the predicted N-Be to estimate theamount of anthropogenic Be(A-Be)present,if any.Severalscenarios are discussed in which samples taken and analyzedfor T-Be for worker o
5、r public protection purposes mightinclude both N-Be and A-Be(see 6.1).This method can allowthe N-Be and A-Be components of T-Be measurements to beestimated.1.3 Values stated in SI units are to be regarded as standard.No other units of measurement are included in this standard.1.4 This guide offers a
6、n organized collection of informationor a series of options and does not recommend a specific courseof action.This document cannot replace education or experi-ence and should be used in conjunction with professionaljudgment.Not all aspects of this guide may be applicable in allcircumstances.This AST
7、M standard guide is not intended torepresent or replace the standard of care by which the adequacyof a given professional service must be judged,nor should thisdocument be applied without consideration of a projects manyunique aspects.The word“Standard”in the title of thisdocument means only that th
8、e document has been approvedthrough the ASTM consensus process.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-min
9、e the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations i
10、ssued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D653 Terminology Relating to Soil,Rock,and ContainedFluidsD7458 Test Method for Determination of Beryllium in Soil,Rock,Sediment,and Fly Ash Using Ammonium Bifluo-ride Extraction
11、and Fluorescence Detection3.Terminology3.1 Definitions:3.1.1 For definitions of common technical terms used in thisstandard,refer to Terminology D653.4.Summary of Guide4.1 This guide describes a Metal Ratio Method(MRM)forusing ratios of measurements of naturally occurring Beryllium(N-Be)with one or
12、more predictor metals in local backgroundsoils to predict the amount of N-Be expected in samples takenin workplaces or other settings to be evaluated.The total Be(T-Be)measured in each individual sample can then becompared with the predicted N-Be to give an estimate of theamount of anthropogenic Be(
13、A-Be)present in that sample,ifany.Being based on ratios,this method can accommodatevarying dilutions of the soils with other materials,includingwipe matrices.4.2 This guide describes the major steps involved in imple-menting a MRM at a site.These include:1This test method is under the jurisdiction o
14、fASTM Committee D18 on Soil andRock and is the direct responsibility of Subcommittee D18.01 on Surface andSubsurface Characterization.Current edition approved Dec.15,2019.Published January 2020.DOI:10.1520/D8299-192For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Cust
15、omer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in
16、 accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.4.2.1 identifying and sampling appropriate N-Be-containingsite-specific background materials;4.2.2 identifying appropriate candidate predictor metals;4.2.3 conducting sample preparation and chemical analysisin a manner designed to
