1、Designation:D680602(Reapproved 2022)Standard Practice forAnalysis of Halogenated Organic Solvents and TheirAdmixtures by Gas Chromatography1This standard is issued under the fixed designation D6806;the number immediately following the designation indicates the year oforiginal adoption or,in the case
2、 of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This practice covers the determination of impurities,stabilizers and assay of halogenated organic
3、solvents and theiradmixtures by gas chromatography.1.2 It is not the intent of this practice to provide a specificmethod of gas chromatography.The intent of this practice is todefine what is required for a user to demonstrate that a methodto be used is valid.The reason for this approach,as opposed t
4、ostating a method,is that gas chromatography is such a dynamicfield that methods are often obsolete by the time they arevalidated.The use of this practice allows the user to use mosteffective technology and demonstrate that the method in usecomplies with a standard practice and is valid for the anal
5、ysisof halogenated organic solvents and their admixtures.1.3 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the
6、applicability of regulatory limitations prior to use.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued
7、by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standard:2E180 Practice for Determining the Precision of ASTMMethods for Analysis and Testing of Industrial and Spe-cialty Chemicals(Withdrawn 2009)33.Terminology3.1 Purity and assay are used inte
8、rchangeably in this stan-dard.3.1.1 Purity or assay are defined as 100 sum(impurities+stabilizer)when impurities and stabilizers are expressed in%;3.1.2 Or 100 sum(impurities+stabilizer)/10 000 whenimpurities are expressed in ppm.3.2 Accuracy is defined per A2.2.1 of Practice E180 or theagreement be
9、tween an experimentally determined value andthe accepted reference value.3.3 Precision is defined per A2.1.7 of Practice E180 or thedegree of agreement of repeated measurements of the sameproperty.It is generally expressed in standard deviations orpercent relative standard deviation(s/X)100,also kno
10、wn ascoefficient of variation.4.Summary of Practice4.1 This practice will define the requirements for a gaschromatographic(GC)method to be valid for the determina-tion of impurities,stabilizers and assay of halogenated organicsolvents and their admixtures.5.Method Requirements5.1 The GC method must
11、give adequate separation of theimpurities and stabilizers common to the product in question sothat the instrument response(area counts,millivolts,etc.)to theindividual impurities or stabilizers can be measured withadequate precision and accuracy as defined in Section 6.Process knowledge from the sup
12、plier or manufacturer of theproduct is a resource of information as to what those impuritiesand stabilizers are.GC-Mass Spectrometry(GC-MS)is an-other resource to initially determine what components arepresent to be measured.See Table 1 for a list of possibleimpurities and stabilizers for each produ
13、ct.1This practice is under the jurisdiction of ASTM Committee D26 on Haloge-nated Organic Solvents and Fire Extinguishing Agents and is the direct responsi-bility of Subcommittee D26.04 on Test Methods.Current edition approved May 1,2022.Published May 2022.Originallyapproved in 2002.Last previous ed
14、ition approved in 2017 as D680602(2017).DOI:10.1520/D6806-02R22.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3T
15、he last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standard
16、ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.15.2 Non polar capillary columns of about 0.32 mm by 30 mgenerally work well.Table 2 provides a list of columns thatmay prove suitable for the analysis of the halogenated organicproducts.5.3 Instrument ConditionsThe following GC conditionsare often appropriate for the analysis of halogenated org
