1、Designation:D722321An American National StandardStandard Specification forAviation Certification Turbine Fuel1This standard is issued under the fixed designation D7223;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last
2、revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers the use of purchasing agenciesin formulating specifications for purchases of aviation turbinefuel und
3、er contract.1.2 This specification defines one specific type of aviationturbine fuel for civil use in the certification of aircraft.Thespecification can be used as a standard in describing the qualityof this aviation fuel from the refinery to the aircraft.1.3 This specification does not include the
4、fuels that arecommonly used in aviation turbine engines.Those are listed inSpecification D1655.1.4 The aviation turbine fuel defined by this specificationmay be used in other than turbine engines that are specificallydesigned and certified for this fuel.1.5 The use of EI/IP(Energy Institute/Institut
5、e of Petro-leum)test methods is permitted.The user of this specificationis referred to Specification D1655(latest revision),Specifica-tion for Aviation Turbine Fuels,Paragraph 2,ReferencedDocuments and Table 1,Detailed Requirements of AviationTurbine Fuels,Column 4,Test Methods,to determine thepairi
6、ng of the IP test method with the particular detailedrequirement,and to Section 11,Test Methods,to identifyjointed standards and referee methods.1.6 The values stated in SI units are to be regarded asstandard.No other units of measurement are included in thisstandard.1.6.1 ExceptionUnits of pressure
7、 are also given in psi.1.7 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organizatio
8、n TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D56 Test Method for Flash Point by Tag Closed Cup TesterD86 Test Method for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD130 Test Method for Corrosiveness to Copper from Petro-leum Prod
9、ucts by Copper Strip TestD381 Test Method for Gum Content in Fuels by Jet Evapo-rationD445 Test Method for Kinematic Viscosity of Transparentand Opaque Liquids(and Calculation of Dynamic Viscos-ity)D1266 Test Method for Sulfur in Petroleum Products(LampMethod)D1298 Test Method for Density,Relative D
10、ensity,or APIGravity of Crude Petroleum and Liquid Petroleum Prod-ucts by Hydrometer MethodD1319 Test Method for Hydrocarbon Types in Liquid Petro-leum Products by Fluorescent Indicator AdsorptionD1322 Test Method for Smoke Point of Kerosene andAviation Turbine FuelD1655 Specification for Aviation T
11、urbine FuelsD1840 Test Method for Naphthalene Hydrocarbons in Avia-tion Turbine Fuels by Ultraviolet SpectrophotometryD2386 Test Method for Freezing Point of Aviation FuelsD2622 Test Method for Sulfur in Petroleum Products byWavelength Dispersive X-ray Fluorescence SpectrometryD2624 Test Methods for
12、 Electrical Conductivity of Aviationand Distillate FuelsD2887 Test Method for Boiling Range Distribution of Pe-troleum Fractions by Gas ChromatographyD3227 Test Method for(Thiol Mercaptan)Sulfur inGasoline,Kerosine,Aviation Turbine,and Distillate Fuels(Potentiometric Method)D3241 Test Method for The
13、rmal Oxidation Stability ofAviation Turbine FuelsD3242 Test Method for Acidity in Aviation Turbine FuelD3338 Test Method for Estimation of Net Heat of Combus-tion of Aviation Fuels1This specification is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and
14、 is the direct responsibility ofSubcommittee D02.J0.01 on Jet Fuel Specifications.Current edition approved Dec.1,2021.Published December 2021.Originallyapproved in 2005.Last previous edition approved in 2017 as D7223 17.DOI:10.1520/D7223-21.2For referenced ASTM standards,visit the ASTM website,www.a
15、stm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C7
16、00,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1?D3828 Test Methods for Flash Point by Small Scale ClosedCup TesterD3948 Test Method for Determining Water Separation Char-acteristics of
