1、Designation:D608919Standard Guide forDocumenting a Groundwater Sampling Event1This standard is issued under the fixed designation D6089;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses
2、 indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This guide covers what and how information should berecorded in the field when sampling a groundwater monitoringwell.Following these recommendations will provi
3、de adequatedocumentation in most monitoring programs.In somesituations,it may be necessary to record additional or differentinformation,or both,to thoroughly document the samplingevent.In other cases,it may not be necessary to record all ofthe information recommended in this guide.The level ofdocume
4、ntation will be based on site-specific conditions andregulatory requirements.1.2 This guide is limited to written documentation of agroundwater sampling event.Other methods of documentation(that is,electronic and audiovisual)can be used but are notaddressed in this guide.The specific activities addr
5、essed in thisguideincludedocumentationofstaticwaterlevelmeasurement,monitoring well purging,monitoring wellsampling,fieldmeasurements,groundwatersamplepreparation,and groundwater sample shipment.1.3 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It
6、 is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.4 This guide offers an organized collection of informationor a series of options and does not recommend a s
7、pecificcourse of action.This document cannot replace education orexperience and should be used in conjunction with professionaljudgment.Not all aspects of this guide may be applicable in allcircumstances.This ASTM standard is not intended to repre-sent or replace the standard of care by which the ad
8、equacy ofa given professional service must be judged,nor should thisdocument be applied without consideration of a projects manyunique aspects.The word“Standard”in the title of thisdocument means only that the document has been approvedthrough the ASTM consensus process.1.5 This international standa
9、rd was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referen
10、ced Documents2.1 ASTM Standards:2D3740 Practice for Minimum Requirements for AgenciesEngaged in Testing and/or Inspection of Soil and Rock asUsed in Engineering Design and ConstructionD5088 Practice for Decontamination of Field EquipmentUsed at Waste SitesD5608 Practices for Decontamination of Sampl
11、ing and NonSample Contacting Equipment Used at Low Level Radio-active Waste SitesD5903 Guide for Planning and Preparing for a GroundwaterSampling Event3.Terminology3.1 DefinitionsFor definitions of terms used in this guide,refer to Terminology D653.3.2 Definitions of Terms Specific to This Standard:
12、3.2.1 chain of custodythe process of maintaining account-ability of the samples for the purpose of identifying potentialbreaches in sample integrity.3.2.2 chain of custody recorda record of all individualswho possess the samples from the time of collection untilanalysis.4.Significance and Use4.1 Whe
13、n sampling groundwater monitoring wells,it is veryimportant to thoroughly document all field activities.Sufficientfield data should be retained to allow one to reconstruct theprocedures and conditions that may have affected the integrityof a sample.The field data generated are vital to the interpre-
14、tation of the chemical data obtained from laboratory analyses1This guide is under the jurisdiction ofASTM Committee D18 on Soil and Rockand is the direct responsibility of Subcommittee D18.21 on Groundwater andVadose Zone Investigations.Current edition approved Aug.1,2019.Published August 2019.Origi
15、nallyapproved in 1997.Last previous edition approved in 2015 as D6089 15.DOI:10.1520/D6089-19.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summ
16、ary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade