1、Designation:D555595(Reapproved 2017)Standard Test Method forDetermination of Free Fatty Acids Contained in Animal,Marine,and Vegetable Fats and Oils Used in Fat Liquorsand Stuffing Compounds1This standard is issued under the fixed designation D5555;the number immediately following the designation in
2、dicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers the determination of th
3、e freefatty acid content of fats and oils.1.2 The values stated in SI units are to be regarded as thestandard.The values given in parentheses are for informationonly.1.3 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the
4、user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision
5、on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Significance and Use2.1 This test method is intended for the determination of thefree fatty acids contained in animal,marine,and v
6、egetable fatsand oils for the purpose of quality assurance.3.Apparatus and Reagents3.1 Oil Sample Bottles,115 or 230 mL(4 or 8 oz)or 250 mLErlenmeyer flasks.3.2 Ethyl Alcohol,95%.The alcohol shall give a definite,distinct,and sharp end-point with phenolphthalein and shall beneutralized with alkali t
7、o a faint but permanent pink color justbefore using.(Isopropanol,99%,may be used as an alternatesolvent with crude and refined vegetable oils.)3.3 Phenolphthalein Indicator Solution,1%in 95%alco-hol.3.4 Sodium Hydroxide Solution,accurately standardized.4.Procedure4.1 Use Table 1 to determine the qua
8、ntities to be used withvarious ranges of fatty acids.4.2 The sample shall be entirely liquid and well mixedbefore weighing.Then weigh the designated sample size intoan oil-sample bottle or Erlenmeyer flask;add to that thespecified amount of hot,neutralized alcohol and 2 mL ofindicator.4.3 Shaking vi
9、gorously,make the titration with alkali to theappearance of the first permanent pink color of the sameintensity as that of the neutralized alcohol before adding thesample.The color shall persist for 30 s.5.Calculation and Report5.1 Report the free fatty acids in percent,by weight:%free fatty acids5m
10、L of alkali3N 328.2weight of sample(1)5.2 Reference this test method in the test report.5.3 The free fatty acids are frequently expressed in terms ofacid value instead of percent free fatty acids.The acid value isdefined as the number of milligrams of KOH necessary toneutralize 1 g of sample.To conv
11、ert percent free fatty acids(asoleic)to acid value,multiply the former by 1.99.6.Precision and Bias6.1 This test method is adopted from the procedures of theAmerican Leather ChemistsAssociation where it has long beenin use and was approved for publication before the inclusion ofprecision and bias st
12、atements was mandated.The originalinterlaboratory test data are no longer available.The user iscautioned to verify by the use of reference materials,ifavailable,that the precision and bias(or reproducibility)of thistest method is adequate for the contemplated use.7.Keywords7.1 fats and oils;free fat
13、ty acids;leather1This test method is under the jurisdiction of ASTM Committee D31 on Leatherand is the direct responsibility of Subcommittee D31.08 on Fats and Oils.This testmethod was developed in cooperation with the American Leather Chemists Assn.(Method H 30-1957).Current edition approved April
14、1,2017.Published April 2017.Originallyapproved in 1994.Last previous edition approved in 2011 as D5555 95(2011).DOI:10.1520/D5555-95R17.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance
15、with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 ASTM International takes no position res
16、pecting the validity of any patent rights asserted in connection with any item mentionedin this standard.Users of this standard are expressly advised that determination of the validity of any such patent rights,and the riskof infringement of such rights,are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised,either reapproved or withdrawn.Your comments are invited either
