1、Designation:D581410Standard Practice forDetermination of Contamination in Recycled Poly(EthyleneTerephthalate)(PET)Flakes and Chips Using a Plaque Test1This standard is issued under the fixed designation D5814;the number immediately following the designation indicates the year oforiginal adoption or
2、,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This practice covers an indication of the quality ofrecycled transparent poly(ethylen
3、e terephthalate)by examina-tion of a wafer or plaque formed by melting a representativesample and quenching it to prevent crystallization.1.2 Specific contaminants and impurities such as aluminumparticles,dirt particles,paper,and fibers are identified in thetransparent wafer.1.3 The overall color of
4、 the plaque is indicative of oxidiz-able contaminants such as ethylene-vinyl acetate(EVA)glueresidue and the number of bubbles present in the plaque givesan indication of the moisture content of the sample.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with
5、 its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.Specific precau-tionary statements are given in Section 8.NOTE1There is no known ISO equivalent to this standard
6、.2.Referenced Documents2.1 ASTM Standards:2D1600 Terminology forAbbreviated Terms Relating to Plas-ticsD5033 Guide for Development ofASTM Standards Relatingto Recycling and Use of Recycled Plastics(Withdrawn2007)3IEEE/ASTM SI 10 Standard for Use of the InternationalSystem of Units(SI):The Modern Met
7、ric System3.Terminology3.1 Definitions:The terminology used in this practice is inaccordance with Terminology D1600 and Guide D5033.Unitsand symbols are in accordance with IEEE/ASTM SI 10:Standard for Use of the International System of Units(SI).3.2 Definitions of Terms Specific to This Standard:3.2
8、.1 plaquea transparent wafer resulting from meltingand rapid quenching of the polymer.4.Summary of Test Method4.1 Transparent poly(ethylene terephthalate)flakes aremelted in an aluminum pan,then the molten sample is rapidlyquenched in ice water to prevent crystallization.The resultingclear plaque is
9、 examined for color indicative of oxidizablecontaminants,bubbles indicative of moisture,and solid con-taminant particles.5.Significance and Use5.1 Presence of paper,metal,or incompatible polymercontamination in poly(ethylene terephthalate)renders the re-cycled polymer unfit for use in secondary prod
10、uct manufactur-ing operations.This procedure is useful for identifying differ-ent types of contamination in recycled PET flakes.6.Apparatus6.1 Oven,forced convection type capable of heatingsamples to 300C.6.2 Tongs,long arm.6.3 Stopwatch,0.1-s accuracy.6.4 Bucket,1 L,stainless steel.6.5 Aluminum Wei
11、ghing Dishes.46.6 Thermally Insulated Gloves.7.Materials7.1 Virgin Poly(ethylene terephthalate).7.2 Ice.1This practice is under the jurisdiction ofASTM Committee D20 on Plastics andis the direct responsibility of Subcommittee D20.95 on Recycled Plastics.Current edition approved Dec.1,2010.Published
12、January 2011.Originallyapproved in 1995.Last previous edition approved in 2002 as D5814 02.DOI:10.1520/D5814-10.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the stand
13、ards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Aluminum weighing dishes,available from Fisher Scientific,or exactequivalents,have been found suitable for this purpose.*A Summary of Changes section appears at the end
14、of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 7.3 Paper Towels.8.Hazards8.1 Always wear thermally insulated gloves when introduc-ing or removing the polymer sample from the oven.9.Procedure9.1 Preheat the oven to 275 6 5
15、C and equilibrate for 30min.NOTE2Accuracy of both time and temperature is critical to validsample-to-sample comparisons using this test.9.2 Obtain three aluminum pans and label them“A,”“B,”and“C.”Weigh 5.5 6 0.1 g of sample into each of the pans.Tap each sample pan gently on a flat surface to evenly
16、 spreadthe chips.9.3 Weigh 5.5 6 0.1 g of virgin PET into another pan.9.4 Quickly open the oven door,place the pans in the centerof the oven,and close the oven door to minimize heat loss.Itis important that this step take place as quickly,efficiently,andreproducibly as possible.9.5 Start the stopwatch as soon as the oven temperaturerecovers and stabilizes at 275C.After 2 min,record the oventemperature(that should be 275C).9.6 Prepare an ice water bath by filling the 1-L bucket withcold tap water
