1、Designation:D551714Standard Test Method forDetermining Extractability of Metals from Art Materials1This standard is issued under the fixed designation D5517;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A
2、number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers the extraction of metals from artmaterials using an extractant that simulates the acid potential ofgastric juice.Th
3、is test method is similar to the extractionmethod in Specification F963,except that it requires conduct-ing extraction steps at body temperature instead of at roomtemperature.The extraction procedure specified in this testmethod is more rigorous than that noted in Specification F963because the proce
4、dure causes the extraction of a larger quantityof metal.1.2 This test method is adapted from the European ToySafety Standard,EN 71-3:1994 but differs from it in that asolvent extraction step is not required for processing waxes oroil-based products and no specific acceptable metal levels arespecifie
5、d.1.3 The rational for this test method is discussed in Appen-dix X1.1.4 This test method should be used on the art material as awhole and not an art material ingredient.Testing the artmaterial as whole would be expected to give a more accurateestimate of soluble metal than from an extrapolation fro
6、mtesting ingredients.1.5 The values stated in SI units are to be regarded asstandard.No other units of measurement are included in thisstandard.1.6 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard
7、to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D4236 Practice for Labeling Art Materials for ChronicHealth HazardsE180 Practice for Determining the Precision of ASTMMethods for An
8、alysis and Testing of Industrial and Spe-cialty Chemicals(Withdrawn 2009)3E456 Terminology Relating to Quality and StatisticsF963 Consumer Safety Specification for Toy Safety2.2 International Standards:4EN 71-3:1994 Safety of ToysISO 3696 Water for Laboratory UseSpecificationsISO3856 PaintsandVarnis
9、hesDeterminationof“Soluble”Metal ContentPart 1:Determination of lead contentFlame atomic ab-sorption spectrometric method and dithiazone spectropho-tometric methodPart 2:Determination of antimony contentFlame atomicabsorption spectrophotometric method and Rhodamine Bspectrophotometric methodPart 3:D
10、etermination of barium contentFlame atomicemission spectrometric methodPart 4:Determination of cadmium contentFlame atomicabsorption spectrometric method and polarographicmethodPart 5:Determination of hexavalent chromium content of thepigment portion of the liquid paint or the paint in powderformDip
11、henylcarbazide spectrophotometric methodPart 6:Determination of total chromium content of the liquidportion of paintFlame atomic absorption spectrometricmethod2.3 USEPA Standards:5USEPA Test Method SW-8461This test method is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings,M
12、aterials,and Applications and is the direct responsibility ofSubcommittee D01.57 on Artist Paints and Related Materials.Current edition approved Jan.1,2014.Published February 2014.Originallyapproved in 1994.Last previous edition approved in 2007 as D5517 07.DOI:10.1520/D5517-14.2For referenced ASTM
13、standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Av
14、ailable from European Committee for Standardization(CEN),36 rue deStassart,B-1050,Brussels,Belgium,http:/www.cenorm.be.5Available from United States Environmental Protection Association(EPA),Ariel Rios Bldg.,1200 Pennsylvania Ave.,NW,Washington,DC 20460,http:/www.epa.gov.Copyright ASTM International
15、,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 6010 Test Method for antimony,arsenic,barium,beryllium,cadmium,chromium,cobalt,copper,lead,manganese,molybdenum,nickel,selenium,silver,thallium,vanadium,and zinc6020 Test Method for aluminum,antimony,arsenic,barium,ber
16、yllium,cadmium,chromium,cobalt,copper,lead,manganese,nickel,silver,thallium,and zinc7040 Test Method for antimony7041 Test Method for antimony7060 Test Method for arsenic7061 Test Method for arsenic7080 Test Method for barium7090 Test Method for beryllium7091 Test Method for beryllium7130 Test Method for cadmium7131 Test Method for cadmium7190 Test Method for chromium7191 Test Method for chromium7200 Test Method for cobalt7201 Test Method for cobalt7210 Test Method for copper7421 Test Method for
