1、Designation:D467694(Reapproved 2012)Standard Classification forRubber Compounding MaterialsAntidegradants1This standard is issued under the fixed designation D4676;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revi
2、sion.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This classification covers antidegradants used in rubberand where appropriate defines their important chemical andphysical character
3、istics for use in rubber.1.2 The general term“antidegradant”describes materialsused in rubber to protect against the effects of oxygen andozone.Materials that fall in this general category include bothantioxidants and antiozonants.1.3 This standard does not purport to address all of thesafety concer
4、ns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D1218 Test Method for Refractive Index and Re
5、fractiveDispersion of Hydrocarbon LiquidsD1519 Test Methods for Rubber ChemicalsDeterminationof Melting RangeD1747 Test Method for Refractive Index of Viscous Mate-rialsD2702 Practice for Rubber ChemicalsDetermination ofInfrared Absorption CharacteristicsD3461 Test Method for Softening Point ofAspha
6、lt and Pitch(Mettler Cup-and-Ball Method)D4571 Test Methods for Rubber Compounding MaterialsDetermination of Volatile MaterialD4574 Test Methods for Rubber Compounding MaterialsDetermination of Ash ContentD4937 Test Method forp-Phenylenediamine AntidegradantsPurity by Gas ChromatographyD5376 Test Me
7、thod for Rubber Compounding MaterialsDetermination of the Basic Nitrogen Content in RubberAntioxidant:Polymerized TMQE28 Test Methods for Softening Point of Resins Derivedfrom Pine Chemicals and Hydrocarbons,by Ring-and-Ball Apparatus3.Significance and Use3.1 There are many different antidegradants
8、available foruse in the rubber industry.3.2 This classification of the various materials covers theirchemical structure along with a brief reference to their overalluse and their properties.4.Basis of Classification4.1 Rubber antidegradants included in this classificationdocument are divided into th
9、e six classes shown below.Theclassification in general is based on the chemical structurecategorization but in most cases it also classifies the materialsaccording to their potential rubber applications.4.2 Class 1,p-Phenylenediamines(PPDs)This group ofadditives represents the primary materials used
10、 in tires andother mechanical goods to impart ozone protection.Theseadditives are also used as antioxidants and antiflex agents in anumber of applications but are considered to be stronglystaining and thus limited to black rubber applications.They canalso be used as raw polymer stabilizers.4.2.1 Alt
11、hough all PPDs have similar performancecharacteristics,the different types are frequently preferred forcertain end use conditions;for example,selection is based onthe type and degree of flexing to be experienced by the rubberarticle.4.3 Class 2,Trimethyl-dihydroquinolines(TMQs)Thesematerials are pri
12、marily used to protect rubber articles fromdegradation by atmospheric oxygen at higher temperatures.They are moderately staining.4.3.1 Although all TMQs have similar performancecharacteristics,different types are frequently preferred toaccommodate processing or end use needs.4.4 Class 3,PhenolicsPhe
13、nolic antidegradants represent agroup of“nonstaining”and“nondiscoloring”additives usedprimarily in light colored mechanical goods and tires.They canalso be employed as raw polymer stabilizers.The term“non-discoloring”is used somewhat loosely,as products yielding1This classification is under the juri
14、sdiction of ASTM Committee D11 onRubber and is the direct responsibility of Subcommittee D11.20 on CompoundingMaterials and Procedures.Current edition approved May 1,2012.Published June 2012.Originallyapproved in 1987.Last previous edition approved in 2006 as D4676 94(2006).DOI:10.1520/D4676-94R12.2
15、For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West
16、 Conshohocken,PA 19428-2959.United States1 slight discoloration are included in this classification.This isdone to distinguish them from the strongly staining anddiscoloring amine type antidegradants(for example,PPDs).4.4.1 The different types of phenolic antidegradant affordvarying degrees of protection against oxidation,heat aging,rubber“poisons,”and crazing.In general they are weakerantioxidants than the staining amines types.4.5 Class 4,Alkylated Diphenylamines(DPAs)This classof additives is
