1、Designation:D5147/D5147M18Standard Test Methods forSampling and Testing Modified Bituminous Sheet Material1This standard is issued under the fixed designation D5147/D5147M;the number immediately following the designation indicates theyear of original adoption or,in the case of revision,the year of l
2、ast revision.A number in parentheses indicates the year of lastreapproval.A superscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 These test methods cover procedures for sampling andtesting prefabricated,reinforced,polymer-modified bituminoussheet materi
3、als designed for single-or multiple-ply applicationin roofing and waterproofing membranes.These products mayuse various surfacing materials on one side.1.2 These test methods cover a number of different prod-ucts.Not all tests are required for every product.Only thosecalled out in the Product Standa
4、rd are required.1.3 These test methods appear in the following order:SectionSampling4Conditioning5Thickness6Load Strain Properties7Tear Strength8Moisture Content9Water Absorption10Dimensional Stability11Low-Temperature Flexibility12Heat Conditioning13Accelerated Weathering14Granule Embedment15Compou
5、nd Stability16Coating Thickness17Low Temperature Unrolling18Precision and Bias191.4 The values stated in either SI units or inch-pound unitsare to be regarded separately as standard.The values stated ineach system may not be exact equivalents;therefore,eachsystem shall be used independently of the o
6、ther.Combiningvalues from the two systems may result in non-conformancewith the standard.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environment
7、al practices and deter-mine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Gui
8、des and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D95 Test Method for Water in Petroleum Products andBituminous Materials by DistillationD146/D146M Test Methods for Sampling and TestingBitumen-Saturated
9、Felts and Woven Fabrics for Roofingand WaterproofingD1204 Test Method for Linear Dimensional Changes ofNonrigid Thermoplastic Sheeting or Film at ElevatedTemperatureD4073 Test Method for Tensile-Tear Strength of BituminousRoofing MembranesD4798/D4798M Practice for Accelerated Weathering TestConditio
10、ns and Procedures for Bituminous Materials(Xenon-Arc Method)D4977/D4977M Test Method for Granule Adhesion to Min-eral Surfaced Roofing by AbrasionD5636/D5636M Test Method for Low Temperature Unroll-ing of Felt or Sheet Roofing and Waterproofing MaterialsD5869/D5869M Practice for Dark Oven Heat Expos
11、ure ofRoofing and Waterproofing MaterialsD6162/D6162M Specification for Styrene Butadiene Sty-rene(SBS)Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber ReinforcementsD6163/D6163M Specification for Styrene Butadiene Sty-rene(SBS)Modified Bituminous Sheet Materials U
12、singGlass Fiber ReinforcementsD6164/D6164M Specification for Styrene Butadiene Sty-rene(SBS)Modified Bituminous Sheet Materials UsingPolyester ReinforcementsD6222/D6222M Specification for Atactic Polypropylene(APP)Modified Bituminous Sheet Materials Using Poly-ester ReinforcementsD6223/D6223M Specif
13、ication for Atactic Polypropylene1These test methods are under the jurisdiction of ASTM Committee D08 onRoofing and Waterproofing and are the direct responsibility of SubcommitteeD08.04 on Felts,Fabrics and Bituminous Sheet Materials.Current edition approved July 1,2018.Published August 2018.Origina
14、llyapproved in 1991.Last previous edition approved in 2014 as D5147/D5147M 14.DOI:10.1520/D5147_D5147M-18.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards D
15、ocument Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Pri
16、nciples for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1(APP)Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber ReinforcementsD6298/D6298M Specification for Fiberglass ReinforcedStyrene-Butadiene-Styrene(SBS)Modified BituminousSheets with a Factory Applied Metal SurfaceD6509/D6509M Specification for Atactic Polypropylene(APP)Modified Bituminous Base Sheet Ma
