1、Designation:D356214Standard Performance Specification forWoven Drycleanable Coat Fabrics1This standard is issued under the fixed designation D3562;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in
2、parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This performance specification covers woven dryclean-able topcoats,overcoats,and dress coat outer fabrics composedof any textile fiber or mixture of
3、textile fibers.1.2 This performance specification is not applicable towoven fabrics used for linings,interlinings,rainwear garments,and all-purpose,water-repellent garments nor is this perfor-mance specification applicable to bonded or laminated fabrics.1.3 These requirements apply to both the lengt
4、h and widthdirections for those properties where each fabric direction ispertinent.1.4 When a fabric requires special treatment,specific meth-ods will be described as they are developed for that material,and such special tests will have precedence over these generalrequirements.1.5 The following pre
5、cautionary caveat pertains only to thetest method portion,Section 7,of this performance specifica-tion:This standard does not purport to address all of the safetyconcerns,if any,associated with its use.It is the responsibilityof the user of this standard to establish appropriate safety andhealth pra
6、ctices and determine the applicability of regulatorylimitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D123 Terminology Relating to TextilesD434 Test Method for Resistance to Slippage of Yarns inWoven Fabrics Using a Standard Seam(Withdrawn2003)3D1424 Test Method for Tearing Strength
7、 of Fabrics byFalling-Pendulum(Elmendorf-Type)ApparatusD2262 Test Method for Tearing Strength of Woven Fabricsby the Tongue(Single Rip)Method(Constant-Rate-of-Traverse Tensile Testing Machine)(Withdrawn 1995)3D2724 Test Methods for Bonded,Fused,and LaminatedApparel FabricsD5034 Test Method for Break
8、ing Strength and Elongation ofTextile Fabrics(Grab Test)2.2 AATCC Test Methods:48 Colorfastness to Crocking:AATCC Crockmeter Method15 Colorfastness to Perspiration16 Colorfastness to Light23 Colorfastness to Burnt Gas Fumes116 Colorfastness to Crocking:Rotary Vertical CrockmeterMethod124 Appearance
9、of Durable Press Fabrics after RepeatedHome Launderings132 Colorfastness to Drycleaning135 Dimensional Changes in Automatic Home Launderingof Durable Press Woven or Knit FabricsEvaluation Procedure 1:Gray Scale for Color ChangeEvaluation Procedure 2:Gray Scale for StainingEvaluation Procedure 3:AATC
10、C Chromatic TransferenceScale2.3 Federal Standard:516 CFR 1610 ChapterIIConsumerProductSafetyCommission,Subchapter DFlammable Fabrics ActRegulations2.4 ASQ Standard:ASQ Z1.4 Sampling Procedures and Tables for Inspectionby Attributes6NOTE1Reference to test methods in this specification give only thep
11、ermanent part of the designation of ASTM,AATCC,or other testmethods.The current editions of each test method cited shall prevail.3.Terminology3.1 DefinitionsFor definitions of textile terms used in thisspecification,refer to the individual ASTM and AATCC testmethods and to Terminology D123.1This spe
12、cification is under the jurisdiction of ASTM Committee D13 onTextiles and is the direct responsibility of Subcommittee D13.61 on Apparel.Current edition approved Feb.1,2014.Published March 2014.Originallyapproved in 1977.Last previous edition approved in 2012 as D3562 99(2012).DOI:10.1520/D3562-14.2
13、For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is reference
14、d onwww.astm.org.4AATCC Technical Manual,available from American Association of TextileChemists and Colorists(AATCC),One Davis Dr.,P.O.Box 12215,ResearchTriangle Park,NC 27709-2215.5Available from U.S.Government Printing Office Superintendent of Documents,732 N.Capitol St.,NW,Mail Stop:SDE,Washingto
15、n,DC 20401.6Available from American National Standards Institute(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 3.1.1 pressing and finishing,nthis term takes into accountall of the industri
16、al pressing and finishing treatments used ingarment production.NOTE2No standard method is available for reproducing on alaboratory level the results of industrial pressing or finishing treatmentsused in the manufacture of garments.4.Significance and Use4.1 Upon mutual agreement between the purchaser and theseller,woven fabrics intended for this end use should meet allof the requirements listed in Table 1 of this specification.4.2 It is recognized that for purposes of fashion or aestheticsthe ult
