1、Designation:D426514Standard Guide forEvaluating Stain Removal Performance in HomeLaundering1This standard is issued under the fixed designation D4265;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number
2、in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This is a guide for evaluating stain removal performanceof home laundry products or home laundering conditions.Itprovides guidance for the selecti
3、on,preparation,application,and examination of various types of stains on test fabrics thatare subjected to controlled but practical stain removal treat-ment conditions.1.2 There is no single combination of stain and fabric thatwill predict the overall performance of a product or treatmentmethod.A si
4、ngle test,even with a variety of stains/fabrics,canonly predict how products or treatment methods compare underthe particular conditions chosen for evaluations.A series ofassessments is necessary to evaluate the many aspects of stainremoval performance and to simulate consumer experiencemore closely
5、.1.3 In this guide,the use of both traditional top-loaderwashing machines as well as front and top-loading high-efficiency washers is addressed.1.4 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are pro
6、vided for information onlyand are not considered standard.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility
7、 of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2D1729 Practice for Visual Appraisal of Colors and ColorDifferences of Diffusely-Illuminated Opaque Materials2.2 AATCC Standard:3Test Method 130-2010 Soil Release:Oily Stain ReleaseMethod3.Terminology3.1 Definitions:3.1
8、.1 front-loading high-effciency(HE)washing machine/washer,nhorizontally or nearly horizontally oriented ma-chine used for laundry that uses varying amounts of water tolaunder fabrics.3.1.1.1 DiscussionThese washers:(1)may not exhibit anyvisible free water or may show significant quantities of visibl
9、efree water,(2)may lift and tumble the clothes load,(3)may useboth spinning and tumbling in both the washer or rinseprocesses,(4)may use jet sprays of wash solution or rinsesolution,or(5)may use thermal or chemical inputs,or both,tooffer sanitation or allergen claims.HE washers use consider-ably les
10、s water and energy than traditional deep-fill washers inthe laundering process.HE washers are labeled by the appli-ance industry and may be recognized by the U.S.Departmentof Energy(DOE)and the U.S.Environmental ProtectionAgency(EPA)as Energy Star rated machines.3.1.2 home laundering,ncleaning or co
11、nditioning,orboth,of textile materials using the washing and drying equip-ment commonly found in the home.3.1.3 pretreaters,nusage of a product designed to treatfabric stains not likely to be removed using detergent in washalone in the normal household laundering process.3.1.3.1 DiscussionPretreater
12、s can be found in many formssuch as sprays and liquids and detergents themselves can beused as a pretreater when applied directly to the stain.3.1.4 stain,na local area of undesired foreign matter on atextile material,differing in appearance from the textile sub-strate.3.1.5 top-loadingHEwashingmach
13、ine/washer,nvertically oriented agitation machine that is used for home1This guide is under the jurisdiction of ASTM Committee D12 on Soaps andOther Detergents and is the direct responsibility of Subcommittee D12.15 onPhysical Testing.Current edition approved Jan.1,2014.Published February 2014.Origi
14、nallyapproved in 1983.Last previous edition approved in 2007 as D4265 98(2007)1.DOI:10.1520/D4265-14.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Docume
15、nt Summary page onthe ASTM website.3Available from American Association of Textile Chemists and Colorists(AATCC),P.O.Box 12215,Research Triangle Park,NC 27709,http:/www.aatcc.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 laundry wit
16、h the fundamental difference from a traditionaltop-loading washer being that this washer uses reduced waterresources during the process.3.1.5.1 DiscussionThis washer may:(1)deep fill once(during the wash or rinse),(2)partially fill one or more times,(3)may have a full agitator,(4)may have an impeller in placeof an agitator,(5)may use thermal or chemical inputs or bothto offer sanitation or allergen claims,or(6)may use spraywashing or spray rinsing technologies,or combination thereof.HE washers u
