1、Designation:D26822Standard Guide forSampling and Testing Volatile Solvents and ChemicalIntermediates for Use in Paint and Related Coatings andMaterial1This standard is issued under the fixed designation D268;the number immediately following the designation indicates the year oforiginal adoption or,i
2、n the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S.Department of Defense.1.Scope1.1 Thi
3、s guide covers procedures for the sampling andtesting of volatile solvents used in the manufacture of paint,lacquer,varnish,and related products.The test methods arelisted in Table 1.1.2 For specific hazard information and guidance,see Sup-pliers Material Safety Data Sheet for materials listed in th
4、isguide.1.3 The values stated in SI units are to be regarded as thestandard.The values given in parentheses are for informationonly.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish
5、 appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for th
6、eDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D13 Specification for Spirits of TurpentineD56 Test Method for Flash Point by Tag Closed Cup TesterD86 Test Me
7、thod for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD93 Test Methods for Flash Point by Pensky-MartensClosed Cup TesterD130 Test Method for Corrosiveness to Copper from Petro-leum Products by Copper Strip TestD156 Test Method for Saybolt Color of Petroleum Products(Say
8、bolt Chromometer Method)D233 Test Methods of Sampling and Testing TurpentineD235 Specification for Mineral Spirits(Petroleum Spirits)(Hydrocarbon Dry Cleaning Solvent)(Withdrawn 2021)3D329 Specification for AcetoneD611 Test Methods for Aniline Point and Mixed AnilinePoint of Petroleum Products and H
9、ydrocarbon SolventsD847 Test Method for Acidity of Benzene,Toluene,Xylenes,Solvent Naphthas,and Similar Industrial Aro-matic HydrocarbonsD848 Test Method for Acid Wash Color of Industrial Aro-matic HydrocarbonsD849 Test Method for Copper Strip Corrosion by IndustrialAromatic HydrocarbonsD850 Test Me
10、thod for Distillation of Industrial AromaticHydrocarbons and Related MaterialsD853 Test Method for Hydrogen Sulfide and Sulfur DioxideContent(Qualitative)of Industrial Aromatic Hydrocar-bons(Withdrawn 2013)3D891 Test Methods for Specific Gravity,Apparent,of LiquidIndustrial ChemicalsD1078 Test Metho
11、d for Distillation Range of Volatile Or-ganic LiquidsD1133 Test Method for Kauri-Butanol Value of Hydrocar-bon SolventsD1209 Test Method for Color of Clear Liquids(Platinum-Cobalt Scale)D1296 Test Method for Odor of Volatile Solvents andDiluents(Withdrawn 2021)3D1310 Test Method for Flash Point and
12、Fire Point of Liquidsby Tag Open-Cup Apparatus1This guide is under the jurisdiction of ASTM Committee D01 on Paint andRelated Coatings,Materials,and Applications and is the direct responsibility ofSubcommittee D01.35 on Solvents,Plasticizers,and Chemical Intermediates.Current edition approved Jan.1,
13、2022.Published January 2022.Originallyapproved in 1927.Last previous edition approved in 2012 as D268 01(2012)which was withdrawn January 2021 and reinstated in January 2022.DOI:10.1520/D0268-22.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at ser
14、viceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM Interna
15、tional,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides a
16、nd Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1?D1353 Test Method for Nonvolatile Matter in Volatile Sol-vents for Use in Paint,Varnish,Lacquer,and RelatedProductsD1363 Test Method for Permanganate Time of Acetone andMethanolD1364 Test Method for Water in Volatile Solvents(KarlFischer Reagent Titration Method)(Withdrawn 2021)3D1476 Test Method for Heptane Miscibility of LacquerSolvents(Withdrawn 2021)3D1555 Test Method for Calculation of Volu