1、:D2639/D2639M-19 STANDARD TEST METHOD FOR PLASTIC PROPERTIES OF COAL BY THE CONSTANT-TORQUE GIESELER PLASTOMETER 2019 ():19.06.2019:3695-19/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19
2、428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken
3、,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM
4、International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D2639/D2639M-19 1 :D2639/D2639M-19 1 D2639/D2639M;,.().1.1.1 .,.1.2,-,-.,;,.1 ASTM D05 ,D05.15 .1 2019.2019.1967.2016.D2639/D2639M-16.DOI:10.1520/D2639_D2639M-19.ASTM D2639
5、/D2639M-19 2 1.3 ,.,.1.4 -,(TT).2.2.1 ASTM:2 D2013/D2013M D2234/D2234M 3.3.1:3.1.1 ,-,-,.3.1.2 ,(DDPM).2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D2639/D2639M-19 3 3.1.2.1 100 360.,1.3.1.3 ,1,0 .3.1.4 ,.3.1.5 ,.3.1.6 ,.3.1.7 .3.1.8 ,DDPM.4.4.1 ,.ASTM D2639/D2639M-1
6、9 4 5.5.1 ,.6.6.1 :6.1.1 ,.1.6.1.2 ,21,4 0,08 0,844 0,003 35,0 1,38,.2,38 0,02 0,094 0,001,.6.1.3 ,.,9,53 0,08 0,375 0,003.6.1.4,121 4,75,9,53 0,08 0,375 0,003.12,7 0,500 ,.,.6.1.5 ,ASTM D2639/D2639M-19 5 3,96 0,03 0,156 0,001 .60.1,59 0,03 0,0625 0,001,6,35 0,05 0,250 0,002 90 3,18 0,03 0,125 0,001
7、 .,180 .,1,59 0,0625 ,.,.6.1.6 ,0,05 0,002.6.2 ,29 2,90 11,4 114.100 ,.,.2.,38,00 0,1 0,0836 0,00022 42,00 0,1 0,924 0,00022.ASTM D2639/D2639M-19 6 .1 12,7 0,500 .0,05 0,002 9,53 0,08 0,375 0,003 .19,05 0,750 .31,75 2,250 3,175 0,125 121 4,75 3,96 0,03 0,156 0,001 60.3,18 0,03 0,125 0,001 6,35 0,05
8、0,250 0,002 1,59 0,03 0,062 0,001 90.9,53 0,08 0,375 0,003 35 1,38 2,38 0,02 0,094 0,001 21,4 0,08 0,844 0,003 1,59 0,0625 ASTM D2639/D2639M-19 7 .2 6.3 ,3,0 0,1C/5,4 0,18F/,3,0 1,0C 5,4 1,8F ,300C 550C 572F 1022F.,50%50%.51,08 0,05 2,00 0,002 3 6,6 ()50,8 0,05 2,00 0,002 :90 ASTM D2639/D2639M-19 8
9、6,35 0,250,.3 .3 6.4 ,10 22 ,.4.9 19,8 1 2,2,114,3 4,5.5.,-.ASTM D2639/D2639M-19 9 7.7.1 D2234/D2234M D2013/D2013M.2,36 8 .1 D2013/D2013M.8.8.1 .,15C 27F,0,1%/.,.500 1,1.500 1,1 ,850 20 250 0,55 .250 0,55 ,425 40 125 0,275.5,0 0,011 .,.8 ,425 40.9.9.1 101,6 5,1 40,0 2,0.ASTM D2639/D2639M-19 10 .4 ()
10、9.2 ,.4,.5,0 0,011 .,.10 22,.15,.,.,.9.3 ,76,2 3 ,300C 572F.6.3.,-10 22 ASTM D2639/D2639M-19 11 10 2 .3,0 0,1C/5,4 0,18F/.5 ()9.4 1-.10.10.1 ,.1 2,2 114 41/2 9 19,8 6,4 1/4 276 107/8 9,5 3/8 38 11/2 19 3/4 16 5/8 19 3/4 13 1/2 76 3 102 4 ASTM D2639/D2639M-19 12 11.11.1 6.1.5 .1.,.,-1,47 0,058 6,10 0
11、,24.12.12.1 .13.13.1 :;.13.2 ,14.1.1,:(a)1000 DDPM,1 DDPM;(b)1000 DDPM 10000 DDPM,10 DDPM;(c)10000 DDPM 20000 DDPM,100 DDPM;(d)20000 DDPM 30000 DDPM,1000 DDPM;ASTM D2639/D2639M-19 13(e)30 000 DDPM,()30000 DDPM.1 ,0,1 DDPM.,10 DDPM,0,1 DDPM.13.3 ,.13.4 :13.4.1 27536 DDPM 22437 DDPM.24986 DDPM.2499 DD
12、PM .14.1.1.25957 DDPM.,26746 DDPM.2675 DDPM .1000 DDPM 13.2(d)27000 DDPM.:388C :440C :490C :102C :27000 DDPM ASTM D2639/D2639M-19 14 14.14.1:14.1.1 ,5C 9F.,10%.,.,().,().14.1.2 ,.2 ,.14.1.2.1 ,.14.2 ,.ASTM D2639/D2639M-19 15 15.15.1;ASTM International -,.,.,.-ASTM International.,.,.ASTM International,100 Barr Harbor Drive,West Conshohocken,PA 19428.610-832-9585,610-832-9555 E-mail:serviceastm.org ASTM:(www.astm.org).,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/.
