1、Designation:D263507(Reapproved 2012)Standard Specification forMethyl Isobutyl Carbinol1This standard is issued under the fixed designation D2635;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in pa
2、rentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers methyl isobutyl carbinol2foruse in paint,varnish,lacquer,and related products.1.2 The following applies to all specified lim
3、its in thisstandard;for purposes of determining conformance with thisstandard,an observed value or a calculated value shall berounded off“to the nearest unit”in the last right-had digit usedin expressing the specification limit,in accordance with therounding-off method of Practice E29.1.3 The values
4、 stated in SI units are to be regarded asstandard.No other units of measurement are included in thisstandard.1.4 For specific hazard information and guidance,consultsuppliers Material Safety Data Sheet.2.Referenced Documents2.1 ASTM Standards:3D268 Guide for Sampling and Testing Volatile Solvents an
5、dChemical Intermediates for Use in Paint and RelatedCoatings and MaterialD1209 Test Method for Color of Clear Liquids(Platinum-Cobalt Scale)D1353 Test Method for Nonvolatile Matter in Volatile Sol-vents for Use in Paint,Varnish,Lacquer,and RelatedProductsD1364 Test Method for Water in Volatile Solve
6、nts(KarlFischer Reagent Titration Method)D1613 Test Method for Acidity in Volatile Solvents andChemical Intermediates Used in Paint,Varnish,Lacquer,and Related ProductsD3329 Test Method for Purity of Methyl Isobutyl Ketone byGas ChromatographyD4052 Test Method for Density,Relative Density,and APIGra
7、vity of Liquids by Digital Density MeterD5386 Test Method for Color of Liquids Using TristimulusColorimetryE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE300 Practice for Sampling Industrial Chemicals2.2 U.S.Federal Specification:4PPP-C-2020 Chemic
8、als,Liquid,Dry,and Paste:Packagingof3.Properties3.1 Methyl isobutyl carbinol shall conform to the followingrequirements:Apparent specific gravity20/20C0.806 to 0.809or25/25C0.803 to 0.806Color,Pt-Co units,max(Note 1)10Water,wt%,max0.1Acidity(free acid as acetic acid),wt%,max0.005Nonvolatile matter,m
9、g/100 mL,max5Purity,wt%,min98.0NOTE1Instrumental Pt-Co color determined by Test Method D5386has been shown to have no statistically significant difference from Pt-Cocolor determined by Test Method D1209.However,it is not knownwhether methyl isobutyl carbinol was part of the sample set included inthe
10、 interlaboratory study.4.Test Methods4.1 The material shall be sampled in accordance withPractice E300 and the properties enumerated in this specifica-tion shall be determined in accordance with the followingASTM test methods:4.1.1 Apparent Specific GravityDetermine the apparentspecific gravity by a
11、ny method that is accurate to the thirddecimal place,the temperature of both specimen and waterbeing 20C or 25C.(See Guide D268 and Test MethodD4052.)4.1.2 ColorTest Method D1209(see Note 1).4.1.3 WaterTest Method D1364.4.1.4 AcidityTest Method D1613.1This specification is under the jurisdiction of
12、ASTM Committee D01 on Paintand Related Coatings,Materials,and Applications and is the direct responsibility ofSubcommittee D01.35 on Solvents,Plasticizers,and Chemical Intermediates.Current edition approved July 1,2012.Published September 2012.Originallyapproved in 1967.Last previous edition approve
13、d in 2007 as D2635 07.DOI:10.1520/D2635-07R12.2This compound is also known as 4-methyl-pentanol-2 and methyl amyl alcohol.3For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to
14、 the standards Document Summary page onthe ASTM website.4Available from Standardization Documents Order Desk,DODSSP,Bldg.4,SectionD,700RobbinsAve.,Philadelphia,PA19111-5098,http:/www.dodssp.daps.mil.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Bar
15、r Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 4.1.5 Nonvolatile MatterTest Method D1353.4.1.6 PurityTest Method D3329.NOTE2The following distillation properties are given for informationonly and are not part of the specification.The initial boiling point is130.0C and the
16、dry point is 133.0C at 760 mm Hg.5.Packaging and Package Marking5.1 Package size shall be agreed upon by the purchaser andthe supplier.5.2 Packaging shall conform to applicable carrier rules andregulations or,when specified,shall conform to Fed.Spec.PPP-C-2020.6.Keywords6.1 methyl isobutyl carbinolSUMMARY OF CHANGESCommittee D01.35 has identified the location of selected changes to this standard since the last issue(D2635-01)that may impact the use of this standard.(Approved June 1,2007.)(1)Adde
