1、=9009276 0030394 T95 m,r _ -1-3 1 i:Designation:D 4162-82 clCTb AMERICAN SOCIETY FOR TESTING AND MATERIALS 1916 Race St.,Philadelphia,Pa.19103 Reprinted from the Annual Book of ASTM Standards,Copyright ASTM If not listed in the current combined index,will appear in the next edition.Standard Specific
2、ation for REINFORCED THERMOSETTING RESIN SEWER AND INDUSTRIAL PRESSURE PIPE(RTRP)This standard is issued under the fixed designation D 4162;the number immediately following the designation indicates the year of original adoption or.in the case of revision,the year of last revision.A number in parent
3、heses indicates the year of last reapproval.A superscript epsilon(E)indicates an editorial change since the last revision or reapproval.1.scope 1.1 This specification covers machine-made reinforced thermosetting resin pipe for use in pressure systems for conveying sanitary sewage,storm water,and man
4、y industrial wastes and corrosive fluids.Pipe covered by this specifi-cation is intended to operate at internal pres-sures of 250 psi gage(1.72 MPa)or less.1.2 The values given in parentheses are pro-vided for information purposes only.2.Applicable Documents 2.1 ASTM Standards:C 58 1 Test for Chemic
5、al Resistance of Ther-mosetting Resins Used in Glass Fiber Reinforced Structure?D 638 Test for Tensile Properties of Plastics D 695 Test for Compressive Properties of Rigid Plastics3 D 790 Tests for Flexural Properties of Un-reinforced and Reinforced Plastics and Electrical Insulating Materials:D 88
6、3 Definitions of Terms Relating to Plas-tics4 D 1600 Abbreviations of Terms Relating to Plastics4 D 2290 Test for Apparent Tensile Strength of Ring or Tubular Plastics and Rein-forced Plastics by Split-Disk Method D 2412 Test for External Loading Properties of Plastic Pipe by Parallel-Plate Loading6
7、 D 2584 Test for Ignition Loss of Cured Rein-forced Resins D 2992 Obtaining Hydrostatic Design Basis for Reinforced Thermosetting Resin Pipe and Fittingsti D 3567 Determining Dimensions of Rein-forced Thermosetting Resin Pipe(RTRP)and Fittings D 3681 Test for Chemical Resistance of Reinforced Thermo
8、setting Resin Pipe in a Deflected Condition6 F 4 I2 Definitions of Terms Relating to Pias-tic Piping Systems6 F 477 Specifications for Elastomeric Seals(Gaskets)for Joining Plastic Pipe6 2.2 I S 0 Standard:ISO/R 1172 Textile Glass Reinforced Plas-tics-Determination of Loss on Ignition 3.Definitions
9、3.I General-Definitions are in accordance with Definitions D 883 or F 412,and abbrevi-ations with Abbreviations D 1600,unless other-wise indicated.3.2 reinforced thermosetting resin pipe-a tu-bular product containing fibrous reinforcement embedded in,or surrounded by,cured ther-mosetting resin.The c
10、omposite structure may contain granular or platelet fillers,thixotropes,pigments,or dyes.Thermoplastic or thermoset-ting liners or coatings may be included.The abbreviation for reinforced thermosetting resin pipe is RTRP.3.3 industrial pipe-pipe designed for inter-nal and external environments,or bo
11、th,com-monly encountered in industrial piping systems This specification is under the jurisdiction of ASTM Committee D-20 on Plastics and is the direct responsibility of Subcommittee D20.23 on Reinforced Plastic Piping Sys-tems and Chemical Equipment.Current edition approved July 30.1982.Published O
12、cto-ber 1982.Annuul Hook ofASTM Srandurds.Parts 34 and 35.Annual Book o f ASTM Standards,Pari 35.Annual Book o f ASTM Stundurds,Parts 34.35,and 36.Annual Book o f ASTM Stundurds.Parts 34 and 36.Annual Book o f ASTM Stundurds,Part 34.Annual Book o f ASTM Stundurds,Part 36.Available from American Nati
13、onal Standards Institute,1430 Broadway,New York,N.Y.10018.I NOTICE:This standard has either been superseded and replaced by a new version or discontinued.Contact ASTM International(www.astm.org)for the latest information.=7009276 0030795 921 9 used for many process solutions or efiluents.3.4 quaflca
14、tion test-one or more tests used to prove the design of a product.Not a routine quality control test.3.5 liner-a resin layer,with or without filler or reinforcement,or both,forming the interior surface of the pipe.3.6 coating-a resin layer,with or without filier or reinforcement,or both,applied to t
15、he exterior surface of the pipe structural wali.4.Classification 4.1 General-This specification covers rein-forced thermosetting resin(RTRP)sewer and industrial pipe defined by raw materials in the structural wall and liner(type),coating mate-rial(grade),and operating pressure(class).The following t
16、ypes,grades,and classes of rein-forced thermosetting resin sewer and industrial pressure pipe are covered.4.1.1 Types:4.1.1.1 Type I-Glass-fiber reinforced ther-mosetting polyester resin pipe with chemical-resistant liner.4.1.1.2 Type 2-Glass-fiber reinforced ther-mosetting epoxy resin pipe with chemical-re-sistant her.4.1.2 Grades:4.1.2.1 Grade 4.1.2.2 Grade 4.1.2.3 Grade 4.1.2.4 Grade reinforced.forced.nonreinforced.reinforced.I-Polyester resin coating-2-Epoxy resin coating-rein-3-Polyester re
