1、Designation:D372 00(Reapproved 2006)An American National StandardStandard Specification forFlexible Treated Sleeving Used for Electrical Insulation1This standard is issued under the fixed designation D372;the number immediately following the designation indicates the year oforiginal adoption or,in t
2、he case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers electrical insulating sleevingsuitable for use on lead wires and
3、in connections in electricalapparatus,such as motors,transformers,and switch gears.1.2 Materials under this specification are limited to a flex-ible tubular product made from a woven textile fiber base,suchas cotton,rayon,nylon,or glass,thereafter impregnated,orcoated,or impregnated and coated,with
4、a suitable insulatingmaterial.NOTE1This standard resembles IEC 60684-3-400 to 408 in title only.The content is significantly different.2.Referenced Documents2.1 ASTM Standards:2D350 Test Methods for Flexible Treated Sleeving Used forElectrical InsulationD1711 Terminology Relating to Electrical Insul
5、ationD4088 Practice for Preparation for Shipment of Solid Elec-trical Insulating Materials32.2IEC Standard:IEC 60684-3 Specification for Flexible Insulating Sleeving43.Terminology3.1 DefinitionsFor definitions of terms used in this speci-fication,see Terminology D1711.4.Classification4.1 Sleeving is
6、 categorized by the type of coating,basefabric material,dielectric breakdown voltage,temperatureindex,minimum wall thickness,and inside diameter,as fol-lows:4.1.1 Type IA flexible treated sleeving made fromorganic-base fibers such as cotton,rayon,or nylon and impreg-nated or coated with an insulatin
7、g material which can be shownby applicable experience or accepted test to have a temperatureindex of 105.4.1.2 Type IIA flexible treated sleeving made frominorganic-base yarns such as fibrous glass and impregnated orcoated with an insulating material which can be shown byapplicable experience or acc
8、epted test to have a temperatureindex of 130.4.1.3 Type IIIA flexible treated sleeving made frominorganic-base yarns such as fibrous glass and impregnated orcoated with an insulating material,such as poly(vinyl chlo-ride),which can be shown by applicable experience or ac-cepted test to have a temper
9、ature index of 105.4.1.4 Type IVA flexible treated sleeving made frominorganic-base yarns such as fibrous glass and impregnated orcoated with an insulating material,such as silicone resin orpolytetrafluoroethylene,which can be shown by applicableexperience or accepted test to have a temperature inde
10、x of 200.4.1.5 Type VA flexible treated sleeving made frominorganic-base yarns such as fibrous glass and impregnated orcoated with an insulating material,such as silicone elastomer,which can be shown by experience or accepted test to have atemperature index of 200.4.1.6 Type VIA flexible treated sle
11、eving made frominorganic-base yarns such as fibrous glass and impregnated orcoated with an insulating material,such as epoxies,polyesters,or acrylics,which can be shown by experience or accepted testto have a temperature index of 155.4.1.7 Type VIIA flexible treated sleeving made frominorganic-base
12、yarns such as fibrous glass and impregnated orcoated with an insulating material which can be shown byexperience or accepted test to have a temperature index of 180.4.2 Grades of sleeving are identified in terms of minimumaverage dielectric breakdown voltage,as shown in Table 1.4.3 Sleeving sizes ar
13、e shown in Table 2,and are based onthe size of round conductors that will fit snugly into the productwithout distortion of the sleeving.5.Ordering Information5.1 Orders for sleeving shall include the following informa-tion:5.1.1 Type and color(Sections 4 and 6),1This specification is under the juris
14、diction of ASTM Committee D09 onElectrical and Electronic Insulating Materials and is the direct responsibility ofSubcommittee D09.07 on Flexible and Rigid Insulating Materials.Current edition approved April 1,2006.Published April 2006.Originallyapproved in 1933.Last previous edition approved in 200
15、0 as D372 00.DOI:10.1520/D0372-00R06.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Withdrawn.The last approved
16、version of this historical standard is referencedon www.astm.org.4Available from American National Standards Institute(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036.1Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959,United States.NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Contact ASTM International(www.astm.org)for the latest information5.1.2 Grade(Section 4),5.1.3 Size(Table 2),5.1.4 Type of put-up(co
