1、Designation:D23313(Reapproved 2017)Standard Test Methods ofSampling and Testing Turpentine1This standard is issued under the fixed designation D233;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in
2、 parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S.Department of Defense.1.Scope1.1 These test methods cover procedures for sampling andtesting tur
3、pentine,as defined by the Code of Federal Regula-tions and Terminology D804.These test methods are also usedfor the sampling and testing of pinenes,the major componentsof most turpentines.1.2 These test methods primarily measure the physicalrather than the chemical properties of turpentines and pine
4、nes.As turpentines and pinenes are currently used chiefly aschemical raw materials for the production of resins andsynthetic organic chemicals,chemical composition is also veryimportant.Consequently,testing the chemical composition ofturpentines and pinenes by gas chromatography has displacedthese t
5、est methods to a large extent.(See for example TestMethods D6387.)1.3 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.4 This standard do
6、es not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.5 This international s
7、tandard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Re
8、ferenced Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD270 Methods of Sampling Petroleum and Petroleum Prod-ucts(Withdrawn 1984)3D804 Terminology Relating to Pine Chemicals,IncludingTall Oil and Related ProductsD1193 Speci
9、fication for Reagent WaterD1209 Test Method for Color of Clear Liquids(Platinum-Cobalt Scale)D6166 Test Method for Color of Pine Chemicals and Re-lated Products(Instrumental Determination of GardnerColor)D6387 Test Methods for Composition of Turpentine andRelated Terpene Products by Capillary Gas Ch
10、romatogra-phyE1 Specification for ASTM Liquid-in-Glass Thermometers2.2 Other Document:Code of Federal Regulations,Title 7,Part 160 Regulationsand Standards for Naval Stores,199943.Significance and Use3.1 The test procedures described in this standard weredeveloped when the chief use for turpentine w
11、as as a solvent.Currently however,the chief use for turpentine(and pinenes)isas raw materials for the production of resins and syntheticorganic chemicals.Thus the chemical composition of turpen-tines and pinenes is extremely important and tests,in additionto the ones described in these test methods,
12、are required inorder to fully characterize turpentines and pinenes.The most1These test methods are under the jurisdiction of ASTM Committee D01 onPaint and Related Coatings,Materials,and Applications and are the directresponsibility of Subcommittee D01.34 on Pine Chemicals and HydrocarbonResins.Curr
13、ent edition approved Dec.1,2017.Published December 2017.Originallyapproved in 1926.Last previous edition approved in 2013 as D233 13.DOI:10.1520/D0233-13R17.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMSt
14、andards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Available from U.S.Government Printing Office Superintendent of Documents,732 N.Capitol St.,NW,Mail Stop:SDE,Washington,DC 2
15、0401,http:/www.access.gpo.gov.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles fo
16、r theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 widely used technique for determining the chemical composi-tion of turpentines(and pinenes)is gas chromatography(seeTest Methods D6387).4.Purity of Reagents4.1 Reagent grade chemicals shall be used in all tests.Unless otherwise indicated,it is intended that all reagents shallconform to the specifications of the Committee on AnalyticalReagents o
