1、Designation:C128817Standard Specification forFiber-Cement Interior Substrate Sheets1This standard is issued under the fixed designation C1288;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in paren
2、theses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable andsuitable for decoration as paint,wallpaper
3、,natural stone,tile,or resilient flooring in internal wet and dry areas.1.2 This specification is not applicable to asbestos-cementflat sheets(Specification C220),non-asbestos fiber cement flatsheets for exterior applications such as claddings,facades,curtain walls,and soffits(Specification C1186),g
4、ypsum back-ing board and coreboard(Specification C1396/C1396M),water-resistant gypsum backing board(Specification C1396/C1396M),glass mat gypsum backing board(SpecificationC1178/C1178M),glass mat gypsum panels(SpecificationC1658/C1658M),fiber-reinforced gypsum panels(Specifica-tion C1278/C1278M),par
5、ticle boards(Definitions D1554),fiber mat cement boards(Specification C1325 and ANSIA118.9),or cement-bonded particleboards(Specification BS5669:Part 4)and(ISO 8335).1.3 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to
6、 SI units that are provided for information onlyand are not considered standard.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides a
7、nd Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2C220 Specification for Flat Asbestos-Cement SheetsC1154 Terminology for Non-Asbestos Fiber-Reinforced Ce-ment ProductsC1178/C1178M Specification for Coated Gl
8、ass Mat Water-Resistant Gypsum Backing PanelC1185 Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet,Roofing and SidingShingles,and ClapboardsC1186 Specification for Flat Fiber-Cement SheetsC1278/C1278M Specification for Fiber-Reinforced GypsumPanelC1325 Specification for Non
9、-Asbestos Fiber-Mat Rein-forced Cementitious Backer UnitsC1396/C1396M Specification for Gypsum BoardC1658/C1658M Specification for Glass Mat Gypsum PanelsD1037 Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel MaterialsD1554 Terminology Relating to Wood-Base Fiber and Par-
10、ticle Panel MaterialsE84 Test Method for Surface Burning Characteristics ofBuilding MaterialsG21 Practice for Determining Resistance of Synthetic Poly-meric Materials to Fungi2.2 ANSI Standards:3A118.1 Specification for Dry-Set Cement MortarA118.4 Specification for Modified Dry-Set Cement MortarA118
11、.9 Test Methods and Specifications for CementitiousBacker UnitsA136.1 Standard for Organic Adhesives for Installation ofCeramic Tile2.3British Standards:3BS 5669:Part 4 Specification for cement bonded particle-board2.4International Standards:3ISO 8335 Cement-bonded particleboardsBoards of Port-land
12、or equivalent cement reinforced with fibrous woodparticles3.Terminology3.1 DefinitionsRefer to Terminology C1154.4.Classification4.1 Flat sheets covered by this specification are intended forinterior dry or wet area applications as a desired unfinished1This specification is under the jurisdiction of
13、 ASTM Committee C17 onFiber-Reinforced Cement Productsand is the direct responsibility of SubcommitteeC17.02 on Non-Asbestos Fiber Cement Products.Current edition approved July 1,2017.Published July 2017.Originally approvedin 1995.Last previous edition approved in 2014 as C128814.DOI:10.1520/C1288-1
14、7.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Available from American National Standards Institute(ANSI),25 W
15、.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internati
16、onally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 substrate or an unfinished substrate for decoration such aspaint,wallpaper,natural stone,tile,or resilient flooring wheredimensional stability is required.4.2 They may be supplied coated or uncoated.4.3 The sheets are further classified into four grades