1、Designation:D107417Standard Test Method forCompressive Strength of Asphalt Mixtures1This standard is issued under the fixed designation D1074;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in paren
2、theses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method provides a method for measuring thecompressive strength of compacted asphalt mixtures.It is foruse with specimens weighed,batched,mixed,a
3、nd fabricated inthe laboratory,as well as for mixtures manufactured in ahot-mix plant.1.2 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.
4、1.3 The text of this standard references notes and footnoteswhich provide explanatory material.These notes and footnotes(excluding those in tables and figures)shall not be consideredas requirements of the standard.1.4 This standard does not purport to address all of thesafety concerns,if any,associa
5、ted with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.1.5 This international standard was developed in accor-dance with internationally recognized principles
6、on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2C136 Test Method for Sieve Analysis of Fin
7、e and CoarseAggregatesC670 Practice for Preparing Precision and Bias Statementsfor Test Methods for Construction MaterialsC702 Practice for Reducing Samples ofAggregate to TestingSizeD75 Practice for Sampling AggregatesD140 Practice for Sampling Bituminous MaterialsD979 Practice for Sampling Bitumin
8、ous Paving MixturesD1075 Test Method for Effect of Water on CompressiveStrength of Compacted Bituminous MixturesD2041 Test Method for Theoretical Maximum SpecificGravity and Density of Bituminous Paving MixturesD2726 Test Method for Bulk Specific Gravity and Densityof Non-Absorptive Compacted Bitumi
9、nous MixturesD3203 Test Method for Percent Air Voids in CompactedDense and Open Bituminous Paving MixturesD3666 Specification for Minimum Requirements for Agen-cies Testing and Inspecting Road and Paving MaterialsD4753 Guide for Evaluating,Selecting,and Specifying Bal-ances and Standard Masses for U
10、se in Soil,Rock,andConstruction Materials TestingE4 Practices for Force Verification of Testing MachinesE2251 Specification for Liquid-in-Glass ASTM Thermom-eters with Low-Hazard Precision Liquids2.2 Federal Specification:Standard Specifications for Construction of Roads andBridges on Federal Highwa
11、y Projects33.Significance and Use3.1 The compressive strength of specimens prepared andtested by this test method along with density and voidsproperties are used for laboratory mix design of asphaltmixtures.One approach is described in ASTM STP 252.43.1.1 This test method also describes the methods
12、formolding,curing,and testing of specimens being evaluated byTest Method D1075.3.1.2 When used in conjunction with other mixture physicalproperties,the compressive strength may contribute to theoverall mixture characterization and is one factor determiningits suitability for use under given loading
13、conditions andenvironment as a highway paving material.3.2 Typical values of minimum compressive strengths fordesign of asphalt mixtures by this test method for different1This test method is under the jurisdiction of ASTM Committee D04 on Roadand Paving Materials and is the direct responsibility of
14、Subcommittee D04.22 onEffect of Water and Other Elements on Asphalt Coated Aggregates.Current edition approved April 1,2017.Published April 2017.Originallyapproved in 1949.Last previous edition approved in 2009 as D1074 09.DOI:10.1520/D1074-17.2For referenced ASTM standards,visit the ASTM website,ww
15、w.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3“Asphaltic Concrete Mix Requirements,”Standard Specifications for Construc-tion of Roads and Bridges on Federal Highway P
16、rojects,Federal HighwayAdministration,Washington,DC,1996,p.233.4Goode,J.F.,“Use of the Immersion-Compression Test in Evaluating andDesigning Paving Mixtures,”Bituminous Paving Materials,STP 252,ASTMInternational,West Conshohocken,PA,1959,pp.113129.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decisio
