1、Designation:D1066181Standard Practice forSampling Steam1This standard is issued under the fixed designation D1066;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of
2、 last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S.Department of Defense.1NOTE3.2.1.1 was editorially corrected in December 2018.1.Scope1.1 This practice covers the sampling of satu
3、rated andsuperheated steam.It is applicable to steam produced in fossilfired and nuclear boilers or by any other process means that isat a pressure sufficiently above atmospheric to establish theflow of a representative sample.It is also applicable to steam atlower and subatmospheric pressures for w
4、hich means must beprovided to establish representative flow.1.2 For information on specialized sampling equipment,tests or methods of analysis,reference should be made to theAnnual Book of ASTM Standards,Vols 11.01 and 11.02,relating to water.1.3 The values stated in SI units are to be regarded asst
5、andard.The values given in parentheses are mathematicalconversions to inch-pound units that are provided for informa-tion only and are not considered standard.1.4 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of
6、 this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the De
7、cision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2A269 Specification for Seamless and Welded AusteniticStainless Steel Tubing for Gen
8、eral ServiceA335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceD1129 Terminology Relating to WaterD3370 Practices for Sampling Water from Closed ConduitsD5540 Practice for Flow Control and Temperature Controlfor On-Line Water Sampling and Analysis3.Terminolog
9、y3.1 Definitions:3.1.1 For definitions of terms used in this standard,refer toTerminology D1129.3.2 Definitions of Terms Specific to This Standard:3.2.1 isokinetic sampling,na condition wherein thesample entering the port(tip)of the sampling nozzle has thesame velocity vector(velocity and direction)
10、as the streambeing sampled.3.2.1.1 DiscussionIsokinetic sampling ensures a represen-tative sample of dissolved chemicals,solids,particles,chemi-cals absorbed on solid particles,and in the case of saturatedand wet steam,water droplets are extracted from a processstream.3.2.2 sample cooler,na small he
11、at exchanger designed toprovide cooling/condensing of process sampling streams ofwater or steam.3.2.3 sampling,nthe extraction of a representative portionof the steam flowing in the boiler drum lead or pipeline bymeans of a sampling nozzle and the delivery of this portion ofsteam in a representative
12、 manner for analysis.3.2.4 saturated steam,na vapor whose temperature cor-responds to the boiling water temperature at the particularexisting pressure.1This practice is under the jurisdiction of ASTM Committee D19 on Water andis the direct responsibility of Subcommittee D19.03 on Sampling Water andW
13、ater-Formed Deposits,Analysis of Water for Power Generation and Process Use,On-Line Water Analysis,and Surveillance of Water.Current edition approved Aug.1,2018.Published August 2018.Originallyapproved in 1949.Last previous edition approved in 2011 as D1066 11.DOI:10.1520/D1066-18E01.2For referenced
14、 ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,
15、PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization T
16、echnical Barriers to Trade(TBT)Committee.1 3.2.5 superheated steam,na vapor whose temperature isabove the boiling water temperature at the particular existingpressure.4.Summary of Practice4.1 This practice describes the apparatus,design concepts,and procedures to be used in extracting and transportingsamples of saturated and superheated steam.Sampling nozzleselection and application,line sizing,condensing requirementsand optimization of flow rates are all described.Condensedsteam samples should
