1、Designation:A1016/A1016M18aStandard Specification forGeneral Requirements for Ferritic Alloy Steel,AusteniticAlloy Steel,and Stainless Steel Tubes1This standard is issued under the fixed designation A1016/A1016M;the number immediately following the designation indicates theyear of original adoption
2、or,in the case of revision,the year of last revision.A number in parentheses indicates the year of lastreapproval.A superscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers a group of requirements that,unless otherwise specified i
3、n an individual specification,shallapply to the ASTM product specifications noted below.Title of SpecificationASTMDesignationASeamless Carbon-Molybdenum Alloy-Steel Boiler andSuperheater TubesA209/A209MSeamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater,and Heat-Exchanger TubesA213/A213M
4、Welded Austenitic Steel Boiler,Superheater,Heat-Exchanger,and Condenser TubesA249/A249MElectric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater TubesA250/A250MSeamless and Welded Ferritic and Martensitic Stainless SteelTubing for General ServiceA268/A268MSeamless and Welded Austenitic S
5、tainless Steel Tubing forGeneral ServiceA269/A269MSeamless and Welded Austenitic and Ferritic/AusteniticStainless Steel Sanitary TubingA270/A270MSeamless and Welded Carbon and Alloy-Steel Tubes forLow-Temperature ServiceA334/A334MWelded Austenitic Stainless Steel Feedwater Heater TubesA688/A688MAust
6、enitic Stainless Steel Tubing for Breeder Reactor CoreComponentsA771/A771MSeamless and Welded Ferritic/Austenitic Stainless Steel Tubingfor General ServiceA789/A789MSeamless and Welded Ferritic Stainless Steel Feedwater HeaterTubesA803/A803MSeamless Austenitic and Martensitic Stainless Steel DuctTub
7、es for Liquid Metal-Cooled Reactor Core ComponentsA826/A826MHigh-Frequency Induction Welded,Unannealed,AusteniticSteel Condenser TubesA851Welded Austenitic Alloy Steel Boiler,Superheater,Condenser,and Heat Exchanger Tubes with Textured Surface(s)A1098/A1098MAThese designations refer to the latest is
8、sue of the respective specifications.1.2 In the case of conflict between a requirement of aproduct specification and a requirement of this general require-ments specification,the product specification shall prevail.Inthe case of conflict between a requirement of the productspecification or a require
9、ment of this general requirementsspecification and a more stringent requirement of the purchaseorder,the purchase order shall prevail.1.3 The values stated in either SI units or inch-pound unitsare to be regarded separately as standard.Within the text,theSI units are shown in brackets.The values sta
10、ted in eachsystem may not be exact equivalents;therefore,each systemshall be used independently of the other.Combining valuesfrom the two systems may result in non-conformance with thestandard.The inch-pound units shall apply unless the“M”designation(SI)of the product specification is specified in t
11、heorder.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarr
12、iers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2A209/A209M SpecificationforSeamlessCarbon-Molybdenum Alloy-Steel Boiler and Superheater TubesA213/A213M Specification for Seamless Ferritic and Aus-tenitic Alloy-Steel Boiler,Superheater,and Heat-Exchanger TubesA249/A249M Specific
13、ation for Welded Austenitic SteelBoiler,Superheater,Heat-Exchanger,and CondenserTubesA250/A250M Specification for Electric-Resistance-WeldedFerritic Alloy-Steel Boiler and Superheater Tubes(With-drawn 2017)3A268/A268M Specification for Seamless and Welded Fer-ritic and Martensitic Stainless Steel Tu
14、bing for GeneralServiceA269/A269M Specification for Seamless and Welded Aus-tenitic Stainless Steel Tubing for General Service1This specification is under the jurisdiction of ASTM Committee A01 on Steel,Stainless Steel and Related Alloys and is the direct responsibility of SubcommitteeA01.10 on Stai
15、nless and Alloy Steel Tubular Products.Current edition approved Sept.1,2018.Published October 2018.Originallyapproved in 2001.Last previous edition approved in 2018 as A1016/A1016M 18.DOI:10.1520/A1016_A1016M-18A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Custo
16、mer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principl
