1、Designation:F137995(Reapproved 2013)Standard Terminology Relating toBarbed Tape1This standard is issued under the fixed designation F1379;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parenthes
2、es indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This terminology is intended for use by barbed tapespecifiers and end-users to give a general understanding of thetypes,sizes,and configuration of barbed tape
3、.2.Terminologyattachment points,npoints where alternate pairs of coilloops are joined around the circumference creating theconcertina effect.(1992)barb length,nmeasured from the barb point to the centerline of the barb cluster.(1992)barb length classification,ncommonly used barbed typesdescribing le
4、ngth and shape;such as long barb,mediumbarb,and short barb.(1995)barb spacing,nthe circumferential or linear distance be-tween the center lines of the barb clusters.(1992)barbed tape,nstrip of metal,machined to produce clustersof sharp points.(1992)clip,na mechanical means of joining two loops.(1992
5、)coil loop,none complete rotation(360)of barbed tape.(1995)coil rotation,nthe spiraling effect that occurs as the concer-tina coils are deployed.(1993)concertina,na pattern formed by attaching adjacent loops ofhelical coils to one another at specified points on thecircumference,resulting in an accor
6、dion-like configuration.(1992)concertina spacing,ndistance between adjacent concertinaattachments in a concertina configuration,as measured downthe length of the extended coil(also called concertinaattachment spacing).(1992)cross section,nshows the width and thickness of material,including the cente
7、r sections shape,core diameter,and corewrap.(See Figs.1-3 for types.)(1993)deployed length,nthe coils as extended for use.It isspecified by the coverage where:Helical coverage=number of coil loops per unit helical loopspacingConcertina coverage=number of coil loops divided by 2 concertina loop spaci
8、ng.(1992)diameter,nspecified size diameters shall be measured acrossthe center line of the packaged coil with a tolerance of 62in.;installed diameters are always less than the packageddiameter of the coil.(1992)double coil,na configuration where a smaller diameter coilis placed inside a larger diame
9、ter coil.The assembled rollsmay be either concertina style or helical style.(1993).DISCUSSION 1.Concertina style,for example,the 24 and 30-in.61and 76-mm diameter coils are attached together at both ends forinstallation purposes.DISCUSSION 2.Helical style,for example,the 24 and 30-in.61 and76-mm dia
10、meter coils are alternately attached together throughout theroll in four places around the circumference.In addition,one coil isfabricated in reverse helix to the companion coil.double loop ties,ntwistable ties used to secure the barbedtape at the tie point(also known as bag ties).(1993)flange,nthe
11、extension of the wrap beyond the core wire orstiffening groove.See Fig.4.(1993)helical,nthe most simple pattern in a barbed tape coil wherethere are no concertina attachments and each coil loop is leftfree in its natural spiral(also called spiral).(1992)helical loop spacing,naverage distance between
12、 each coilloop in a helical coil configuration.(1992)long barb,nbarbs having an average length of 1.2 6 5%.(1995)loop spacer wire,nwire that is attached loop-to-loop(or onconsecutive attachment points)on the barbed tape to presetthe loop spacing.(1992)medium barb,nbarbs having an average length of 0
13、.4 65%.(1995)1This terminology is under the jurisdiction of ASTM Committee F14 on Fencesand is the direct responsibility of Subcommittee F14.40 on Chain Link Fence andWire Accessories.Current edition approved March 1,2013.Published March 2013.Originallyapproved in 1992.Last previous edition approved
14、 in 2008 as F1379-95(2008).DOI:10.1520/F1379-95R13.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 off set barbs,nangling of the barb cluster from the centerline of the tape in opposite directions.See Fig.5.(1993)short barb,nbarbs having
15、an average length of 0.1875 65%.(1995)single coil,na configuration where there is one coil with onediameter,the coil being either helical or concertina style.(1992)spot welds,nmeans of permanently joining two adjacent coilloops by fusing them through a heat or electrical process.(1993)splice connect
16、ions,njoining of consecutive coils.(1993)splicing tail,nthe barb clusters extending beyond the lastattachment at both ends of the coil.(1993)tie points,nthe location where ties are placed securing thecoils to brackets,wires,or cables including fence fabric,atthe specified spacing.(1993)wire rings(hog rings),nwires formed to make attachmentsduring splicing or under certain conditions to serve as analternate to the tie wires(see double loop ties).(1993)ASTM International takes no position respecti
