1、Designation:F107597(Reapproved 2018)An American National StandardStandard Specification forDehumidifier,Shipboard,Mechanically Refrigerated,Self-Contained1This standard is issued under the fixed designation F1075;the number immediately following the designation indicates the year oforiginal adoption
2、 or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers self-contained dehumidifiersusing hermetic refrigerant mo
3、tor-compressors.1.2 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.3 The following safety hazards caveat pertains only to thetest metho
4、ds portion,Section 11,of this specification:Thisstandard does not purport to address all of the safety concerns,if any,associated with its use.It is the responsibility of the userof this standard to establish appropriate safety,health,andenvironmental practices and determine the applicability ofregu
5、latory limitations prior to use.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Or
6、ganization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2B117 Practice for Operating Salt Spray(Fog)ApparatusB280 Specification for Seamless Copper Tube for Air Con-ditioning and Refrigeration Field ServiceD1654 Test Method for Evaluation of Painted or CoatedSpec
7、imens Subjected to Corrosive EnvironmentsD2247 Practice for Testing Water Resistance of Coatings in100%Relative Humidity2.2 ASHRAE Standards:3ASHRAE 15 Safety Code for Mechanical Refrigeration2.3 Offcial Classification Standards:4Uniform Freight Classification Ratings,Rules,and Regula-tions2.4 UL St
8、andards:5UL 474 DehumidifiersUL 984 Hermetic Refrigerant MotorCompressors2.5 Military Documents:6MIL-S-901 Specification Requirements for Shock Tests,High Impact(H.I.);Shipboard Machinery,Equipment,and SystemsMIL-STD-167-1 Mechanical Vibrations of ShipboardEquipment,(Type IEnvironmental and Type III
9、nternally Excited)MIL-D-19947 Specification for Dehumidifier,Space,Me-chanically Refrigerated,Self-Contained,Naval Shipboard3.Ordering Information3.1 Orders for products under this specification shall includethe following information,as necessary,to describe adequatelythe desired product:3.1.1 Title
10、,ASTM designation,and year of issue,3.1.2 Quantity(number of dehumidifiers),3.1.3 Certification if required,and3.1.4 Additions to the specification and supplementaryrequirements,if required.4.Materials and Manufacture4.1 Inadditiontotherequirementscitedinthisspecification,the dehumidifiers covered b
11、y this specificationshall be designed,constructed,assembled,and tested to com-ply with UL 474,UL 984,and ASHRAE 15.In the event of1This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is the direct responsibility of Subcommittee F25.11 onMachinery and
12、Piping Systems.Current edition approved Sept.1,2018.Published October 2018.Originallyapproved in 1987.Last previous edition approved in 2014 as F1075 97(2014).DOI:10.1520/F1075-97R18.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org
13、.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Available from American Society of Heating,Refrigerating,and Air-Conditioning Engineers,Inc.(ASHRAE),1791 Tullie Circle,NE,Atlanta,GA30329,http:/www.ashrae.org.4Available from Unifor
14、m Classification Agent,Tariff Publication Officer,Room1106,222 South Riverside Plaza,Chicago,IL 60606.5Available from Underwriters Laboratories(UL),2600 N.W.Lake Rd.,Camas,WA 98607-8542,http:/.6Available from U.S.Government Printing Office,Superintendent ofDocuments,732 N.Capitol St.,NW,Washington,D
15、C 20401-0001,http:/www.access.gpo.gov.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Princ
16、iples for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 differences between any of the requirements of this specifica-tion and those of other referenced documents,the requirementsof this specification shall govern.The manufacturer shallcertify compliance with the above standards for equipmentfurnished and shall be cited in the UL Electrical Appliance andUtilization Equipment product director
