1、Designation:F156794(Reapproved 2019)An American National StandardStandard Specification forFabricated or Cast Automatic Self-Cleaning,Fuel Oil andLubricating Oil Strainers1This standard is issued under the fixed designation F1567;the number immediately following the designation indicates the year of
2、original adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers automatic or continuouslyself-cleaning a
3、utomatic strainers,or both,for use in fuel andlubrication oil systems.The strainer is designed to operateunder positive pressure(discharge side of the pump).Strainersmanufactured to this specification are suitable for use in anymarine environment.1.2 It is not the intent of this document to redefine
4、 existingfiltration standards.The intent is to provide sound guidelinesfor purchasers and designers of lube oil and fuel oil systems.Nominal micron requirements and filter efficiencies shall be asagreed upon by the purchaser and manufacturer and stated inthe purchase order document.1.3 This internat
5、ional standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committ
6、ee.2.Referenced Documents2.1 ASTM Standards:2D3951 Practice for Commercial PackagingF795 Practice for Determining the Performance of a FilterMedium Employing a Single-Pass,Constant-Rate,LiquidTest(Withdrawn 2002)3F1199 Specification for Cast(All Temperatures and Pres-sures)and Welded Pipe Line Strai
7、ners(150 psig and150F Maximum)F1200 Specification for Fabricated(Welded)Pipe LineStrainers(Above 150 psig and 150F)2.2 ASME Standards:4ASME Boiler and Pressure Vessel Code:Section VIII Divi-sion 1,Pressure VesselsASME Boiler and Pressure Vessel Code:Section IX Weldingand Brazing ProceduresB16.5 Pipe
8、 Flanges and Flanged Fittings(Including Ratingsfor Class 150,300,400,600,900,1500,and 2500)B16.42 Ductile Iron Pipe Flanges and Flanged Fittings:Classes 150 and 300Y14.5 Dimensioning and Tolerancing2.3 American Welding Society Standard:5AWS D1.3 Structural Welding Code2.4 MSS Standards:6SP25 Standar
9、d Marking Systems for Valves and FittingsSP55 Quality Standards for Valve,Flanges and Fittings andOther Piping Components(Visual Method)2.5 Federal Specification:7PPP-F-320 Fiberboard:Corrugate and Solid Sheet Stock(Container Grade)and Cut Shapes2.6 Military Specifications:8MIL-P-116 Preservation,Me
10、thods ofMIL-B-121 Barrier Material,Greaseproofed,Water Proofed,FlexibleMIL-S-901 Shock Tests,H.I.(High Impact):ShipboardMachinery,Equipment and Systems,Requirements forMIL-P-15024 Plates,Tags and Bands for Identification ofEquipmentMIL-P-15024/5 Plates,Identification2.7 Military Standards:8MIL-STD-1
11、67-1 Mechanical Vibrations of ShipboardEquipment(Type IEnvironmental and Type II InternallyInduced)1This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is the direct responsibility of Subcommittee F25.11 onMachinery and Piping Systems.Current edition
12、approved May 1,2019.Published June 2019.Originallyapproved in 1994.Last previous edition approved in 2013 as F1567 94(2013).DOI:10.1520/F1567-94R19.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards v
13、olume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Available from American Society of Mechanical Engineers(ASME),ASMEInternational Headquarters,Two Park Ave.,New York,NY 10016-5990,htt
14、p:/www.asme.org.5Available from American Welding Society(AWS),8669 NW 36 St.,#130,Miami,FL 33166-6672,http:/www.aws.org.6Available from Manufacturers Standardization Society of the Valve and FittingsIndustry(MSS),127 Park St.,NE,Vienna,VA22180-4602,http:/www.mss-hq.org.7Available from U.S.Government
15、 Printing Office,Superintendent ofDocuments,732 N.Capitol St.,NW,Washington,DC 20401-0001,http:/www.access.gpo.gov.8Available from DLA Document Services,Building 4/D,700 Robbins Ave.,Philadelphia,PA 19111-5094,http:/quicksearch.dla.mil.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,W
16、est Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 MIL-STD-740 Airborne and Structureborne Noise Measure-ment and Acceptance Criteria of Shipboard EquipmentMIL-STD-2073-1 Material Procedures
