1、Designation:F275514Standard Safety Specification forCautionary Labeling of Inflatable Air Mattresses1This standard is issued under the fixed designation F2755;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.
2、A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONSince 2002(until Jan.1,2008),the Consumer Product Safety Commission(CPSC)has receivedreports of 16 tragic deaths,mostly infants younger
3、than 8 months of age,who were placed to sleepon air mattresses.Eleven suffocated in a facedown position on an air mattress,and five died as a resultof suffocation after falling into gaps between the mattress and bed frame or mattress and adjacentfurniture or wall.1.Scope1.1 This safety specification
4、 covers safety requirementsaimed at providing cautionary labeling information for saferuse of inflatable air mattresses(also known as“air beds,”collectively referred to herein as“inflatable air mattresses”).The intent of this safety specification is to reduce child(infant)injuries and fatalities cau
5、sed by suffocation on inflatable airmattresses.1.2 This safety specification covers all size inflatable airmattressesincluding but not limited to full,queen,king,andtwin sizes.1.3 This safety specification does not cover inflatable airmattresses designed specifically for use in Durable InfantProduct
6、s.1.4 This safety specification is intended to reduce entrap-ment hazards to children and risk of suffocation to infants up toand including age 15 months.1.5 This safety specification includes inflatable air mat-tresses intended for recreational,camping,and other indoorand outdoor uses.1.6 This stan
7、dard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ANSI
8、Standards:2ANSI Z535.4 Standard for Product Safety Signs and LabelsANSI Z535.6 Product Safety Information in ProductManuals,Instructions,and Other Collateral Materials3.Safety Requirements3.1 Soft and hard outer retail packaging or storagecontainer,or both,of the product shall,on the principal displ
9、aypanel,include all of the cautionary information in accordancewith 5.2.Each mattress shall have a permanent label orsewed-on tag located in a conspicuous location stating all ofthe cautionary information in accordance with 5.2.3.2 On product labels with cautionary information shall bein contrasting
10、 color(s)to the background,permanent,andconspicuous.3.3 On product labels shall useANSI Z535.4 as a guide withrespect to legibility,type of lettering,color,and symbol.Asample label is shown in Fig.1.3.4 The cautionary information may also be enhanced bydifferent text or graphics.4.Safety Instruction
11、s4.1 ANSI Z535.6 shall be used as a guide with respect to theformat and location of this information.4.2 Instruction manuals provided with each inflatable airmattress shall include all of the following cautionary informa-tion:1This specification is under the jurisdiction of ASTM Committee F15 onCons
12、umer Products and is the direct responsibility of Subcommittee F15.63 onInflatable Air Mattresses.Current edition approved March 1,2014.Published March 2014.DOI:10.1520/F2755-14.2Available from American National Standards Institute(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.C
13、opyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 4.2.1 Infants have suffocated on inflatable mattresses.Neverplace infant aged birth to 15 months to sleep on this inflatableair mattress/air bed.Infants can suffocate on an underinflatedor de
14、flated mattress,on bedding,by co-sleeping with anotherperson,and by entrapment between the mattress and bed frameor between the mattress and a vertical surface.4.2.2 Children can be entrapped between the inflatablemattress and an adjacent vertical surface.Provide at least ashoulder width space betwe
15、en the inflatable mattress/airbedand adjacent vertical surfaces such as walls,dressers,or otherobjects.4.2.3 Always keep the inflatable mattress fully inflatedwhen in use.5.Labels5.1 Each inflatable air mattress shall be labeled with warn-ing statements.The warning statements shall be in contrasting
16、color(s),permanent,such that the warning statements cannotbe removed without the use of tools,visible when the productis in the manufacturers recommended use position to a personwho is inflating the air mattress,and in sans serif style font.5.2 In warning statements,the safety alert symbol“”andthe word“WARNING”shall not be less than 0.24 in.(6 mm)high.The remainder of the text shall be characters whose uppercase shall be at least 0.12 in.(3 mm)high.5.2.1“”WARNING:Risk of Suffocation.5.3 The warn
