1、 INTERNATIONAL STANDARD IEC61249-4-5 First edition2005-09 Materials for printed boards and other interconnecting structures Part 4-5:Sectional specification set for prepreg materials,unclad Polyimide,modified or unmodified,woven E-glass prepreg of defined flammability Reference number IEC 61249-4-5:
2、2005(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolida
3、ted editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC
4、publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new ed
5、itions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC pub
6、lications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as we
7、ll as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need
8、 further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC61249-4-5 First edition2005-09 Mate
9、rials for printed boards and other interconnecting structures Part 4-5:Sectional specification set for prepreg materials,unclad Polyimide,modified or unmodified,woven E-glass prepreg of defined flammability IEC 2005 Copyright-all rights reserved No part of this publication may be reproduced or utili
10、zed in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:
11、inmailiec.ch Web:www.iec.ch M For price,see current cataloguePRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 61249-4-5 IEC:2005(E)CONTENTS
12、 FOREWORD.3 1 Scope.5 2 Normative references.5 3 Materials and construction.6 3.1 Reinforcement.6 3.2 Resin system.6 4 Properties.6 4.1 Properties related to the appearance of the prepreg.6 4.2 Properties related to B-stage prepreg.7 4.3 Properties related to prepreg after curing.8 5 Delivery form.9
13、 5.1 Rolls.9 5.2 Sheets.9 5.3 Cut panels.10 6 Quality assurance.10 6.1 Quality system.10 6.2 Responsibility for inspection.10 6.3 Qualification inspection.10 6.4 Quality conformance inspection.10 6.5 Certificate of conformance.10 6.6 Safety data sheet.10 7 Packaging and marking.11 8 Shelf life.11 9
14、Ordering information.11 Bibliography.13 Table 1 Flammability.9 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.61249-4-5 IEC:2005(E)3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING ST
15、RUCTURES Part 4-5:Sectional specification for prepreg materials,unclad Polyimide,modified or unmodified,woven E-glass prepreg of defined flammability FOREWORD 1)The International Electrotechnical Commission(IEC)is a worldwide organization for standardization comprising all national electrotechnical
16、committees(IEC National Committees).The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.To this end and in addition to other activities,IEC publishes International Standards,Technical Specifications,Technical Reports,Publicly Available Specifications(PAS)and Guides(hereafter referred to as“IEC Publication(s)”).Their preparation is entrusted to technical committees;any IEC National Committee interested in t
