1、 INTERNATIONAL STANDARD IEC60384-16 QC 301200Second edition2005-11 Fixed capacitors for use in electronic equipment Part 16:Sectional specification:Fixed metallized polypropylene film dielectric d.c.capacitors Reference number IEC 60384-16:2005(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERN
2、AL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions
3、 of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is ke
4、pt under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects
5、 under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.
6、ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently
7、 issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Cent
8、re:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC60384-16 QC 301200Second edition2005-11 Fixed capacitors for use in electronic equipment Part 1
9、6:Sectional specification:Fixed metallized polypropylene film dielectric d.c.capacitors IEC 2005 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in wri
10、ting from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch U For price,see current cataloguePRICE CODE Commission Electrotechnique InternationaleInter
11、national Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 60384-16 IEC:2005(E)CONTENTS FOREWORD.4 1 General.7 1.1 Scope.7 1.2 Object.7 1.3 Normative references.7 1.4 Information to be given in a detail spec
12、ification.8 1.5 Terms and definitions.9 1.6 Marking.10 2 Preferred ratings and characteristics.10 2.1 Preferred characteristics.10 2.2 Preferred values of ratings.10 3 Quality assessment procedures.11 3.1 Primary stage of manufacture.11 3.2 Structurally similar components.11 3.3 Certified records of
13、 released lots.11 3.4 Qualification approval.12 3.5 Quality conformance inspection.18 4 Test and measurement procedures.19 4.1 Visual examination and check of dimensions.19 4.2 Electrical tests.20 4.3 Robustness of terminations.23 4.4 Resistance to soldering heat.23 4.5 Solderability.23 4.6 Rapid ch
14、ange of temperature.23 4.7 Vibration.23 4.8 Bump.24 4.9 Shock.24 4.10 Climatic sequence.25 4.11 Damp heat,steady state.26 4.12 Endurance.26 4.13 Charge and discharge.26 4.14 Component solvent resistance.28 4.15 Solvent resistance of the marking.28 Bibliography.29 Table 1 Preferred values.9 Table 2 P
15、referred combinations.11 Table 3 Sampling plan together with numbers of permissible defectives for qualification approval tests.13 Table 4 Test schedule for qualification approval.14 Table 5 Lot-by-lot inspection.19 Table 6 Periodic inspection.19 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERN
16、AL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.60384-16 IEC:2005(E)3 Table 7 Voltages to be applied.20 Table 8 Measurement requirements.21 Table 9 Insulation resistance requirements.21 Table 10 Correction factors.22 Table 11 Characteristics at lower category temperature.22 Table 12 Characteristics at upper category temperature.22 Table 13 Preferred severities.24 Table 14 Test conditions.26 Table 15 Lead spacing.27 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS L
