1、】The American Society ofMechanical EngineersyA N A MERICAN NAT I ON AL STA N D A R DSHEARS(METAL CUTTING,HAND)CONTROLLE日Control No.:9326Si riGIssue DateIssue To及ASME B107.16M-1998(Revision of ASME B107.16-1992)为ropmducto1 ar or代gm进ed withoutllease from i号FOREWORD(This Foreword is not part of ASME B1
2、07.16M-1998.)The American National Standards Committee B107,Socket Wrenches and Drives,undersponsorship of The American Society of Mechanical Engineers,held its organizationalmeeting on June 28,1967.Subsequently,the Committee was reorganized as an ASMEStandards Committee and its title was changed to
3、 Hand Tools and Accessories.This Standardis a revision of ASME B107.16-1992,Shears(Metal Cutting,Bench and Hand).Significant changes made to the 1992 edition of this Standard consist of revising thetitle of the Standard to read Shears(Metal Cutting,Hand),removing the Bench Typecutting shears,and rev
4、ising Classification for the remaining shears.Suggestions for improvement of this Standard are welcome.They should be sent to TheAmerican Society of Mechanical Engineers,Attn:Secretary,ASME B107 Main Committee,Three Park Avenue,New York.NY 10016-5990.This revision wasapproved as an AmericanNational
5、Standard on April 3.1998.ONot for ResaeTables1Dimensions for Type I,Class 1,Styie A and B Straight Cut,in.6IA.Dimensions.for Type I.Class 1.Style A and B Straight Cut.mmDimensions for Type I.Class 2.Style A and B.Circular Cut.in:2A Dimensions for Type I,Class 2,Style A and B Circular Cut,mm.3Dimensions for Type I,Class 3.Duckbill,in.83A Dimensions for Type I,Class 3,Duckbill,mm.84 Dimensions for Type II,Class 1,2,3.4,and 5 Compound Lever,in.94A Dimensions for Type Il,Class 1,2,3,4,and 5 Compound Lever,mm9多ONo repreduotenor natwarkng permhed without cee fromSQ:。始4O
