1、Designation:D826719aStandard Test Method forDetermination of Total Aromatic,Monoaromatic andDiaromatic Content of Aviation Turbine Fuels Using GasChromatography with Vacuum Ultraviolet AbsorptionSpectroscopy Detection(GC-VUV)1This standard is issued under the fixed designation D8267;the number immed
2、iately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This test m
3、ethod is a standard procedure for the deter-mination of total aromatic,monoaromatic and diaromaticcontent in aviation turbine fuels using gas chromatography andvacuum ultraviolet detection(GC-VUV).1.2 Concentrations of compound classes and certain indi-vidual compounds are determined by percent mass
4、 or percentvolume.1.2.1 This test method is developed for testing aviationturbine engine fuels having concentration test results rangingfrom 0.487%to 27.876%by volume total aromaticcompounds,0.49%to 27.537%by volume monoaromaticsand 0.027%to 2.523%by volume diaromatics.NOTE1Samples with a final boil
5、ing point greater than 300 C thatcontain triaromatics and higher polyaromatic compounds are not deter-mined by this test method.1.3 Individual hydrocarbon components are not reported bythis test method,however,any individual component determi-nations are included in the appropriate summation of the
6、totalaromatic,monoaromatic or diaromatic groups.1.3.1 Individual compound peaks are typically not baseline-separated by the procedure described in this test method,thatis,some components will coelute.The coelutions are resolvedat the detector using VUV absorbance spectra and deconvolu-tion algorithm
7、s.1.4 This test method has been tested for aviation turbineengine fuels;this test method may apply to other hydrocarbonstreams boiling between hexane(68 C)and heneicosane(356 C),including sustainable alternative jet fuels but has notbeen extensively tested for such applications.1.5 UnitsThe values s
8、tated in SI units are to be regardedas standard.No other units of measurement are included in thisstandard.1.6 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,heal
9、th,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of Internati
10、onal Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4307 Practice for Preparation of Liquid Blends for Use asAnalytic
11、al StandardsD5186 Test Method for Determination of the AromaticContent and Polynuclear Aromatic Content of DieselFuels By Supercritical Fluid ChromatographyD6299 Practice for Applying Statistical Quality Assuranceand Control Charting Techniques to Evaluate AnalyticalMeasurement System PerformanceD63
12、00 Practice for Determination of Precision and BiasData for Use in Test Methods for Petroleum Products andLubricantsD6379 Test Method for Determination of Aromatic Hydro-carbonTypesinAviationFuelsandPetroleumDistillatesHigh Performance Liquid ChromatographyMethod with Refractive Index DetectionD6730
13、 Test Method for Determination of Individual Com-ponents in Spark Ignition Engine Fuels by 100-MetreCapillary(with Precolumn)High-Resolution Gas Chro-matography1This test method is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct respons
14、ibility ofSubcommittee D02.04.0L on Gas Chromatography Methods.Current edition approved Nov.1,2019.Published November 2019.Originallyapproved in 2019.Last previous edition approved in 2019 as D8267 19.DOI:10.1520/D8267-19A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact
15、ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohock
16、en,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 D6792 Practice for Quality Management Systems in Petro-leum Products,Liquid Fuels,and Lubricants TestingLaboratoriesD7372 Guide for Analysis and Interpret
